dgjeynes's latest activity
-
Every load gets 20 mins from last ingredient being put in here, we love burning fuel. But it saves me pushing silage in all day as the... -
Unless I’m chopping something the mixer stays off until I put the sheargrab on for the last ingredient which is grass silage. Then the...
-
dgjeynes replied to the thread Which tub mixer.That makes sense
-
dgjeynes replied to the thread Which tub mixer.Do you not end up with horrendously over mixed silage? Always seemed easy to over mix when I used a tub but could just have been the...
-
I’ve a valtra 121 on my 24 cube Trioliet mix in high box then when I start it back up to feed I put it out in low box. 11600kg this...
-
https://www.enegis.co.uk/, might be worth a look, they seem to have an array or machines . personally upgraded our older 14cube rmh...
-
dgjeynes replied to the thread Which tub mixer.Capacity and quality of mix. Our Keenan really struggles to break up our wetter silage. We’ve also started feeding a couple kg of baled...
-
I’m not sure an RS is better than anything else but the service and backup is exceptional. - Not that we’ve needed it much.
-
dgjeynes replied to the thread Which tub mixer.Didn’t know that was available? Might be an option
-
Gone from a Keenan to a tub in last month. Have a 24 cube Trioliet it can feed 225 in one load 12 ton.
-
I’d be looking for 24cube,RS would be top of my list,mainly because we’ve a good local lad looks after them and if you ever have a...
-
Our 18 cube gets 7t of mix and spills a bit for 135 highs. Think you’ll need to go bigger than 21 cube to make it one mix. We’ve had...
-
Thread has taken an unusual turn, very different from what I would have previously expected from TFF. In earlier time I would have...
-
Offer the farm will be yours one day…… SS
-
Looking at upgrading from our current Keenan 140 to a twin tub and want to beable to feed all the milkers in one batch approx 170 cows...
