Recent content by DJ-speed

Basically steering and hydraulics are terrible unless it's got lots of revs, slow to lift, and then not got great lift capabilities, will still tip a trailer but not very quickly, thinking new pump with high speed kit would sort it

Have about 2000 pso so a little low, manual says should be 2500, don't have flow tester though

What would you do to check the mcv and relief valve?

You either damaged the switch so it is live permanently or the wires are now shorting together making the 3rd function live, so it operates the 3rd function valve not the crowd.

I stand corrected.

Tried that as I saw it on another thread and no difference

Hi, i have a case ih 885 2wd, one of the last 885s, intratrac say it's actually 895 in disguise, But lately the steering wheel spins but the front wheels don't respond for ages, it's better at full revs but still not great, rear linkage seems to be working OK, no obvious leaks, so thinking...

Did these sell?

I think some models can be UM or US fitting as my 560 is US fitment

480 65 28

Found these and went for it

Hi im looking for a loader for my case 885, must have euro 8 cradle fitted, self level would be nice but not essential. Thinking quicke or trima but anything with euro 8 would do, not looking to spend the earth though. Close to or in Devon would be nice What have you got? pm me with pics and...

Surely that would depend on the trampoline size, and they dont have rings in the end so could fall off, I tried some vapormatic springs, but they are too long. Guess I'll have to measure the gap between the pins. Or buy new rams with the inbuilt springs

Apologies for the resurrection, but I have a ken wooton 12T trailer, and it's missing the brake return spring, which from what I see goes from the pivot pin to a V shaped clip which retracts the ram as soon as you lift your foot off the brake. Does anyone know the correct size spring and where I...