Pretty sure it’s the unequal brake pressure code. Simple fix which I picked up off the Claas group on FB is this, ram your foot hard on the brake pedals at exactly the same time as starting it, it equalises out the brake pressures and clears the code, it’s worked every time for me on my...
Says 6S 165 on the bonnet, my friend has a 6716 brilliant tractor on Mchale round baler, sadly the cab isn’t really big enough for me to live with an MF on a daily basis with my six foot four large frame I can’t get the seat back far enough.
I’ll confirm the poor fuel economy on the 2 litre I replaced mine with an Isuzu VCroas auto and my long term economy is 5mpg better at 30mpg compared to 25 on the Wildtrak. I should say my V Cross has the dealer Remap
Beware of the CNH cash cow otherwise known as the compensator valve which bolts onto the hydraulic pump, the main symptom of problems with it are the inability to operate small hydraulic rams but still being able to tip a trailer. I had a Maxxum 110 that couldn’t fold a Tedder and a puma130 that...
I called for a chat on the APV stand as I have one of their seeder units on an Amazone Catros disc. It’s badged as an Amazone Greendrill. The woman on the stand was very helpful as I need a different seed roller for sowing catch crop mixtures.
I had a 18 plate Tekna for 2 years it spent a few weeks in the dealership for erratic/ surging during acceleration got sorted never found out what caused it. It drank diesel like a fish for the whole time I had it roughly did 80 miles per quarter tank when not towing compared to my current...
On a side note here when does ballasting a smaller frame tractor become too much ballast, I’ve got a Weaving Fenix dire to drill and 750kg on a Puma 150 is nowhere near enough.
I’m six foot four and had to move the seat back in my friends 6716s to drive it. I really like it but seating position compared to my Puma and Arion leaves a lot to be desired.
I’m six foot three and find a lot of tractors need the seat moved back as far as possible. Latest MF aren’t great, had to move the runners on my mates 6716s. Went to a Kubota demo obviously nobody over 5 foot 10 was involved in r and d.
I was driving my friends MF 6716s yesterday going from one job to another with the baler, I pulled off from a road junction and it got stuck in 3E I had to drive half a mile to the farm at 16.5kmh once I was on the yard I stopped it and re started and it was fine after. I couldn’t change up or...
I was staying in Cardiff Bay last night and Yr Heddlu must have had a job lot of Dunkin Donuts to chomp through as the local boy racers were doing circuits of the area in their re mapped pops and bangs Gtis for quite a while, it’s the same in West Wales too it sounds like Monte Carlo some...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.