Farmerpickle's latest activity

The netter and knife work perfectly from the first bale. Very pleased.

Do you have any tips on how to get the arms off? They are rusted on!

Watch the video….just a lot of bolts to loosen…..simple job…..easier the second time.

I'm going to get a new blade for mine.

The net blade? Its very easy if slightly fiddly. I think you can get 4 goes out of one if it's not too rusty, needs good square edges...

Thank you so much for your help, it is greatly appreciated! The next question is have you had any experience changing the blade? Is that...

Yep, it looks like it's the wrong way round according to the picture, took me several rolls to work out why the keeper for the cone...

Hope these help, off out baling. Dunno where you are but if you're anywhere near East Devon and want to drop in and go through the baler...

Just got in, out baling tomorrow morning so will take a picture but don't stress too much it really is quite simple. Have to say my...

.

Welger net goes up the back as he's got it but will work either way Crappie drawing but should be roughly like that

Knife lock will be just where it is shown on the video…may not look exactly like that. Excellent Video….do what it says and the BALER...

Sorry I beg to differ - I always put it in like that then wondered why the lock on the left side was pulling the wrong way and I had to...

3.51 on the video…no it isn’t correct….up the back over the bar…below the next one then over the top to the foam roller and down to the...