Fergie Ploughman's latest activity

  • Fergie Ploughman
    Fergie Ploughman reacted to Pennine Ploughing's post in the thread Matching 183 boards with Haha Haha.
    Cut n shut boards are not allowed in vintage 😂😂😂😂
  • Fergie Ploughman
    Fergie Ploughman replied to the thread Matching 183 boards.
    Me and Rob Simmister bought two pairs of new old stock off Mark Weston a good few years ago, all four seemed to match up well.
  • Fergie Ploughman
    Fergie Ploughman replied to the thread Matching 183 boards.
    When I replaced my repro boards with new old stock YL183K boards they did match up perfect with each other, as best as I could see with...
  • Fergie Ploughman
    Fergie Ploughman replied to the thread Grassland starts.
    I guess so, but it does have a bearing as you're cutting a 6"x10" slice and inverting it, but I understand its the board push that...
  • Fergie Ploughman
    Fergie Ploughman replied to the thread Grassland starts.
    When I do my first run after the split I only just skim the surface with my rear body, I try and get it so I can crush it on the next...
  • Fergie Ploughman
    Fergie Ploughman reacted to Howard150's post in the thread Grassland starts with Like Like.
    If the disc is tight on the back body first run there will be no grass in the crown. Similarly lower the front disc and nip it op to do...
  • Fergie Ploughman
    Fergie Ploughman replied to the thread Grassland starts.
    Trouble is, we very rarely get turf for a practice! What would I need between the two furrow walls width wise, I was assuming 26/28"...
  • Fergie Ploughman
    Fergie Ploughman replied to the thread Grassland starts.
    I'll have to correct this now....Cheshire is up there with the best for food! Proper sit down meal and cakes to die for....
  • Fergie Ploughman
    Fergie Ploughman replied to the thread Grassland starts.
    Just got my Ransome good ploughing book out again looking at grassland starts, as we seemed to be talking about them at a match the...
  • Fergie Ploughman
    Fergie Ploughman replied to the thread plough value.
    If someone will give you £150, I'd bite their hand off...
  • Fergie Ploughman
    Fergie Ploughman replied to the thread plough value.
    If you advertise that on ebay or FB market place you'd describe it as a match plough, which is what most folk seem to think :ROFLMAO...
  • Fergie Ploughman
    Fergie Ploughman replied to the thread Ransomes ts86.
    Did the RWM's come out before the Bonnings? My F-i-L has two styles of Bonnings/legs which came with his TS86, they're enormous compared...
  • Fergie Ploughman
    Fergie Ploughman reacted to Pennine Ploughing's post in the thread Ransomes ts86 with Haha Haha.
    As far as I can see the TS86 came about to facilitate the RWM bodies, that a far longer body than the likes of the TCN for example...
  • Fergie Ploughman
    Yes, we will indeed talk first, just wanted to try and get some facts/logic. Re fall, not really. What we did do though is put a riser...
  • Fergie Ploughman
    I can see your point. Trouble is, said issue is surrounded by challenges - electric gates, camera poles, gate control post, cattle grid...
Top