Got alot of stuff, but Ive always kept atleast one of every fuel and oil filter for all my machines.
Another thing is a spare joystick for the two different telehandlers.
Unfortunately I've not seen an 00/10 SE with eco 540 and most don't have aircon either.
It's just got to sit on a big trailed tedder in the summer and our smaller hedge cutter in the winter.
It was mainly wiring that gave trouble.
You've 3 or 4 solenoids on the front axle, some gear position switches round the gearsticks and an ecu.
So a few opportunities for problems
Maybe te 4G module has failed.
Speaking to Farmstream, the chap said he can check and replace if needed.
Certain modules he can't replace.
Do you have a reset button, you could try pressing.
Poor signal is usually my issue with that Problem.
Had my 2 cams for 4 years on EE and this last 6 months hasn't been so good.
Spoke to chap at Farmstream (very helpful) and got an eternal aerial, which has helped a little.
He said the 4G module can get tired and can need replacing.
That one.
I use CamHi app for my LivestockEye 360ptz cameras, so don't have that.
I assume the dot is new?.
You can't get any further than "connecting" ?
Unfortunately the strippers are beyond reprofiling and one of the 'tongues' they bolt tonis also history.
Even further back (or sideways) it's been pushed up.
Telehandler pulling the front of plunger and bottom jack in rear of chamber, was needed to encourage the plunger back.
Straighten a few...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.