36 of:
Main opener pins and bushes
Seed tabs
Firming wheels
Boot springs
So not massively bulky. Shared freight costs would work well. I ll pm you my number, Cheers
Mike
Our 2013 6m 750a is in need of some tlc now.
Are the pro series boots worth the extra spend? For JD parts they are £112pro, £48 90 series.
Is anyone putting together an order from Exapta (USA) or BPR (Aus.)? Have some prices for the bits I need / fancy. Exapta seem more competitive at the...
Think it will go you ll just get some header losses. At least most of the stalks will get chopped. Got a maize header in the shed will fit on a lexion if you get stuck.
When setting or playing about with the gap between the tyres and discs it's worth giving the pinch bolt another check. If it has been loose the wheel holder can have slid away from the disc, increasing the gap.
The scraper rings seem like a good idea to me. Any one on them in the UK?
£112 on a 3-4 day stock order.
We had this problem 2 weeks back when conditions were sticky.
Original wheels had done 6500 acres and lip was worn and damaged on them, removing shims did not fix the problem.
Spoked wheels were purchased and all is well, patience for drier times would probably...
Thanks. Think I've got that. Yes got to use a relay as the signal wire going to earth to switch the seeder into work.
Really wanted to know if the socket can be made live using a work trigger rather than headland management button ie automatically as the arms are lowered. It will work as I've...
Does anyone know a way of getting an external signal from the datatronic in work trigger.
I am trying to get a signal to turn a stocks seeder on and off as arms are raised and lowered without fitting a finger switch on the linkage.
Cheers
Mike
Does anyone have a source for a shim to pinch up the bearing in the depth wheel? I know it has been discussed on here, using a washer to take the play out but in my mind it needs about a 0.5 mm shim? Apologies if it is already on here....... Thanks Mike.
I ended up using industriehof. Done two rakes with them now, never broken one. Bent them through mis use. Good firm to deal with. Alot less than£30 when I last had them.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.