Recent content by Fivedoors

Looks like you have been trying to stop it dripping a small tap on the square end sometimes seats it in the taper if you are lucky!

Make sure the cables are activating the gear box selectors first had a similar 1st reverse loss,turned out to be a sheared roll pin on a external selector fork also had a small roll pin shear joining the cables in the cable sheath near the end at the gearbox on a 525

Earlier this year brought a fert spreader exactly as described he was a very honest seller could not find any reason not to trust him all his machines looked good

About the same price I would say in Melton last Wednesday

About the same price I would say in Melton last Wednesday

About the same price I would say in Melton last Wednesday

About the same price I would say in Melton last Wednesday

Not sure if these are suitable but I have a vapormatic electric diverter valve as a third service on a loader they do 6 port diverters must be something suitable in the world of hydraulics!

I have a 4002 and used ep140 phoned Andrew guest for the quantity needed just to be sure!

Why not open fully on the scale and calibrate the drill and compare with the chart on the hopper or get the kvernland app mine says 387kgha at 110 on the scale

As all above mine is only 5 meters and 4 ton carrying capacity but can be really useful moving cultivators to wide for the road ,did some reseeding last year managed to get roll cultivator spreader on so only one journey moves combi as well!

There was a rust inhibitor you could get from Ford dealerships with the quantity needed to mix with antifreeze and water not sure if you can still get it ,we use to put it in a 5610 when new it coated the internals grey just carried on with antifreeze after a few years.

Same here they also say they need access to the property to read the meter and I am obstructing them by having a entrance gate,the meter is at the side of the road on the council verge told them this four times and the letters keep coming not been read in six years and I am to blame idiots!

As above have used her and Rachel o,Connor at Michelmores very good advice,think hard before going down this route the pounds soon add up!

Funny you said that had one of my golf course customers asking if I could get on with it a week ago I declined his kind offer which surprised him!