forblue's latest activity
-
Fforblue replied to the thread Project Ford 5000.Possibly check valve seat, ball pitted or spring weak or broken to get at it is top cover off, remove ram cylinder and between top of...
-
Fforblue replied to the thread Project Ford 5000.So what model 4000 ?, will come back to you later i am not like you rich farmers as always something to do, lol.
-
Fforblue replied to the thread Project Ford 5000.The pump should not be constant pumping if you look at linkage there is a small pin that protrudes over edge of lift cylinder so when...
-
Fforblue replied to the thread Project Ford 5000.82.5mm is measured from the top of quadrant that lift lever sits in to front edge of lever in draft, the unload valve should be an easy...
-
Fforblue replied to the thread Project Ford 5000.Surprised to hear pick-up blocked but at least thats another tick off list, unload valve can stick and as it's so long ago now i am not...
-
Fforblue replied to the thread Ford 4000 engine oil and hydraulic/ transmission spec.Note original cnh oil was multi F which was a thicker oil but even if cnh dealer has old stock it will be stupid price, as multi G is...
-
Fforblue replied to the thread Project Ford 5000.Unlikely to be clogged screen could be something as simple as woodruff key sheared on main pump gear likely if nut has loosened as this...
-
Fforblue replied to the thread Project Ford 5000.Never use ether use brake cleaner it's less volatile, and there are no filters to glean on hyd's and if they worked before you took box...
-
Fforblue replied to the thread New Holland 8340.First look at two multi-pin connectors under right front of cab spray electric cleaner on pins Codes E38-45 go through them also look...
-
Fforblue replied to the thread Ford tw crossshaft.
-
Fforblue replied to the thread Which conventional small bale baler?.Never ever had a problem on 570-5, first check feeder rotor timing in relation to each other and also to plunger, there is also an...
-
Fforblue replied to the thread Steam cleaning Ford 3910 diesel tank in situ?.I did one about 3yrs ago but not really the right way, remove bonnet and infill panel and support, 4 small bolts attach this to cyl head...
-
Fforblue replied to the thread Ford 4600 lift issue.More than likely it's the internal linkage inside which means top cover off but if you have never done one some don'ts, do not lift top...