Recent content by GB1

They have Alrena macerator now anybody no anything about them

Looking to put a 8m dribble bar on the back of my tanker. Has anyone got or had experiences with a spreadwise dribble bar, good or bad.

Thanks for your replies. Think we will have to look into it as payback will only be about 2 years with the amount we are using. The water has quite a bit of iron in it so will make sure we maintain the filter. I can’t see mains getting cheaper any time soon.

Hi all Thinking about installing a borehole, keeping our mains as backup. Was just wondering what annual running costs are likely to be.

Was that a 12-12 shuttle box? Mine is a 1989 8 speed box

Hi I’ve just bought a MF 350 and it’s currently on 16.9/30 rear wheels. It seems too fast in every gear especially reverse. Does anyone know what wheels it would have originally had? Would putting smaller wheels on it slow it down?

That’s ideal thanks

Hi. I need to move my straw chopper between two tractors and want a simple and quick mount system for the electric control box. Any ideas and what have any of you done?

Hi all. We’ve got a 2010 tier 2 5460 with a loader on it and thinking to upgrade to a 2013 tier 3 5460. Does anyone know if the loader brackets will transfer from one to the other. Thanks

Is this any help

The tips are fine but may build them up a bit and adjust the bottom pan.

Looked at a Sherborne when we bought the west but thought the west was better built.

Hi thanks for that. That’s ideal. 3-4mm seems very close but ours is more like 75mm so that’s probably the problem. I think I will look into the springs as well. Thanks.

Hi I have a west 1600 which is leaving a line of slurry when I’m spreading. Could anyone tell me what their distance is between the rotor and the pan underneath and wether thiscan be adjusted. Thanks

Thanks I have had some temporary insoles made, can’t believe the difference got to try these for a few weeks before they make permanent ones