Recent content by gmc541

  1. G

    Quicke loader

    Chris, your were correct on your original comment on wide boom, US type brackets. Maybe wider rather than wide. The 970 fits into a US subframe and is 50mm wider than the standard US type. 880mm compared to 830. It is stepped in on bearing boxes. Apologies for not agreeing with you previously...
  2. G

    650/60 x 38 or 600/60 x 38 tyres

    Set in co tyrone.
  3. G

    Mailleux mx100 ( mc cormick mc115) brackets wanted

    This is the two I was hoping to put together
  4. G

    Mailleux mx100 ( mc cormick mc115) brackets wanted

    Looking for a set of brackets for mc cormick mc115 / 130 to fit mailleux mx100 loader
  5. G

    JF 1050 vs JF 900

    Everything you will ever need for up to jf 1100 FC 80 to fct 1100 and all in between
  6. G

    JF 1050 vs JF 900

    Send me a picture, I break jf and have new and s/h
  7. G

    BN 3 1300 500 533 used wheels and tyres needed

    Where are you based? Couple of good ones in co tyrone
  8. G

    John Deere 3050?

    Might be the synchro if it screeches when trying to engage or maybe stiff. From memory double clutch helps but I could be wrong about that
  9. G

    John Deere 6010 wheels and tyres

    If you want to get back to original, I have a set of michelin 520 70 34 at 99.9% available in tyrone
  10. G

    Quicke loader

    It should do, it's the type of brackets are the key.
  11. G

    Case international 895 hydraulic problems

    I agree that roll bar is a safer way to work. Front end loader in raised position is alot stronger and no danger of head injury if rollover. I know it is not ideal but it works for me
  12. G

    Case international 895 hydraulic problems

    Noo nooo, I have be catapulted that high that I haven't even pulled the cord on parachute yet🤣. I have to add that all the tractor does is buckrake and I use loader as my safety guard. It is unbelievable how much of a pleasure it is to drive without the cramped cab and I also removed the...
  13. G

    Case international 895 hydraulic problems

    If truth is to be told, there is a very wet bale on loader and she hit a bit of unexpected rough concrete an up she went. My daughter seen it as a photo opportunity but I declined to be there🙈🙈
  14. G

    Case international 895 hydraulic problems

    Not a good example of what to do, but this was after a new pump was fitted. Old one was OK but slow so 4240 spec was introduced.
  15. G

    JF FCT 1060 M/D Control Box

Top