Recent content by grangenolvinfarm

  1. grangenolvinfarm

    T6.145 Autocommand purchase?

    The 145 did the ploughing, bit of trailer work and is now ISOBUS and GPS for spreading/spraying between T7 AC. 145 has plenty of power much more comfortable than TM, the TM had the supersteer... 145 extremely pokey, would recommend highly.
  2. grangenolvinfarm

    T6.145 Autocommand purchase?

    Apologies for not updating, its good to keep forums updated/with solution. In 2022, when I posted this. I ended up purchasing the T6.145 AC and was a great decision. Went up to dealer recently that had T6.160 AC Golden Jubilee and he still never advertised, just used it himself. So I sold my...
  3. grangenolvinfarm

    Autocommand stuck in low range

    We have had a mechanic from dealership out and plugged it in and no faults appeared on his computer. He believes the clutch/trans is okay and that the problem is the tractor is lacking HP. He tested the turbo and changed fuel filters but to no avail. He wants to put it on dyno but I am...
  4. grangenolvinfarm

    Autocommand stuck in low range

    Sorry after further testing it's going any speed up to 25k. Just depends if going up or down hill. If straight does about 14Kmh
  5. grangenolvinfarm

    Autocommand stuck in low range

    Will do it again tomorrow and record it. Thanks
  6. grangenolvinfarm

    Autocommand stuck in low range

    Has been doing this for past couple of days. Started with one of the workers driving home with trailer.
  7. grangenolvinfarm

    Autocommand stuck in low range

    Bit of black smoke coming out of exhaust, also very sluggish up very small hill.
  8. grangenolvinfarm

    Autocommand stuck in low range

    Yes. Calibrated for a few minutes then showed done.
  9. grangenolvinfarm

    Autocommand stuck in low range

    Calibrated it and no change.
  10. grangenolvinfarm

    Autocommand stuck in low range

    How do you calibrate it?
  11. grangenolvinfarm

    Autocommand stuck in low range

    Hi, I have a 2017 T6.145 AutoCommand. It is currently stuck in the lower of two gears and won’t drive past about 10m/h I have a 2019 T7 AC and I know by pressing two buttons I can lock her in low range, this T6 however does not have this option to lock it and is still displaying speed to up to...
  12. grangenolvinfarm

    Camera into Intelliview III

    Ideal, thanks for the help.
  13. grangenolvinfarm

    Camera into Intelliview III

    and how did you manage to get power to camera?
  14. grangenolvinfarm

    Camera into Intelliview III

    what cables did you need to buy matt?
  15. grangenolvinfarm

    New Holland TS115A engine smoke

    There is a bit of oil seepage alright.
Top