Recent content by Hayboy

Do you have anymore info on the pto hammer mill?

Do you have access to gas? You can form them by heating.

I’m not sold on them myself but thought it worth sharing. Some of my spanners managed to grow legs and walk during the autumn so am on the look out for a set as it seems better value to buy a full set than replace what’s missing. Likely end up with Teng or perhaps Halfords professional, I really...

Wera joker ratchet spanner set seem like a good discount on Amazon https://www.amazon.co.uk/dp/B00BT0AYG0/ref=cm_sw_r_cp_awdb_imm_t1_44EC1JQYZAA6W01QAT98?_encoding=UTF8&psc=1

I’d think it’d be ok, I’m using a 100l compressor that may well have been on the ark and it keeps up

Started with one of these. Cut a hole, added some hinges and finally found a use for a spanner made of cheese Test firing Definitely helped with removing the paint. Removed the rest of the paint and cut off some unnecessary bits Finished ! No new materials harmed in the making of this.

The above are good units and they are helpful on the phone. If you get the correct unit you can just plug it into spools and let it filter as you use the machine. I’ll have a look see if I can find the prices

Majority seem to be Narvik or Momento with some being unbranded. Vast majority are standard 6 sided with some deep mixed in. I’m working through them to list on eBay and will update the list with prices etc when I get through them. They will obviously be cheaper on here than ebay

Impact Sockets for sale individually. No prices as yet as I still working though these, some new some used. New will be at least 1/2 price and used will be around 1/3. Any interest drop me a message and I'll come back with a price and photos of the individual socket. Metric Sockets...

Proper factory clearance seem to be handled by a few big auction houses. One was less than 10 mins from Wilson’s but yet was handled by a specialist firm. One good thing in a proper clearance is the machines tend to be genuine. Watch the fees tho as they can be a bit high and I have seen a...

So far I’ve resisted signing up but yes from the bits I’ve seen they seem to cover quite a range.

Farmflix seems to be generating a big following and from the bits I’ve seen on YouTube seems to be well made. I think they have a big back catalogue so should be plenty to watch

Finally got around to making a stand for my Mag Drill, vice has a small Anvil at the back which fits on a taper so made this to slide in on the taper. So far so it’s working a charm.

You are quite right, I’ve just been out to check and the current tyres are 420/85 r34 (16.9 r34) 320/85 x r24 (12.4 r24) Would I be right in thinking I could fit a set of 38 and 28 as long as the ratio is kept the same? So maybe easier to move up a size as well as wider ?

Hi, I’m looking for a set of wider wheels and tires to suit a ford 6610. Currently on 16.9 r34 and 14.9 r24.