Recent content by Hilti

Got 1 here technically it's 3rd season but doesn't do much if I've not got time with the welder 1st . Flail hangers are attached with poor welds ( knocked of many ) Yes it's a beast when it's going due to high rotor speed . Perfectly ok for a cheep Chinese topper - stick to the easy going Yes...

Something a bit different .... Irish terrier ( kerry blue ) Great companion, will spend days on end in tractor / forklift. Happy to help with sheep ( ewes hate her ) + has a nip at the cows given half a chance . Bombproof with the kids, doesn't cast either. Has many faults - noise'y wee Shite...

How old / how many hours? hitch rods in lower hours , hook worn in cassette on higher

Any updated prices ? Been quoted £73.50 delivered , thought it may have been nearer £70

Don't have the luxury of a power float ( partly down to location ) Mixing ourselves with gravel off the farm finished with a top screed of bought in 5/10 mm with sand . was more concerned about curing time & if a sealer would help to stop any dust / scrubbing from feet

Currently laying floor in 105x60 shed , having a wedding reception in there in 3 weeks time - should I seal it to keep it going dusty , if so any recommendations?

Tek screw , quick & simple + should be more than strong enough

looking for around 20t for a shed floor - any1 dealt with the above ? Think he's just a agent as post code for collection in Middlesbrough docks Or any1 have other contacts? thanks in advance

My other tractor is on 710 42 & 600 30 VF continental's , yes they grip well but haven't been brave enough to run them as low pressure as the previous set aw xeobibs Consensus seams to be that they are worth the premium , probably the best wae to maximise flotation & grip without cheating (...

Opinions on VF tyres please , are they worth the extra over standard flotations ? ( 540/65r30 650/65r42 ) How are people getting on with them , wear rates ect

Must be green & black hoses on my manitou then .... exact same colours as l wrap with

It's tiny bits of silage wrap ( have a wrapper on forklift , running a free flow return to tank ) must be a ram somewhere on wrapper that's able to nip plastic . Suction filter in tank was gummed up solid back in the summer to the extent it was collapsing the main feed pipe 😔

need to investigate further, brass filter before fan motor has sooked itself in & I'm guessing the missing bit has headed off into the valve block / Hyd motor 😔

Obvious all done . Fan no longer doing reverse auto cycle . Fling some water on the radiator & she cools down instantly fan does spin but only at a gentle idle