Recent content by Hotbed

Hi, I’m looking for the wider 935mm square cross for my ME match plough or even the shorter 825mm one to cut a bit out of Cross shaft is 70mm x 38mm . Anyone got one for sale ? Thanks

I’ve bought and supplied F+G buildings for the last 6 years, great company to deal with and will continue using them .

Thomas panels do a galvanised steel gutter that fits in the original asbestos brackets, 6” or 8” is available, I’ve fitted loads of it and it’s the cheapest option in the long run.

Is this still available ?

Good evening, I’ve recently bought a 2003 4355 which I think is definitely down on power, I drove my friends 4355 which is the same year and similar hrs, his one is like a pocket rocket compared to mine . I’ve changed the fuel filter and checked the little pencil filter in the lift pump (which...

Thanks .

Could anyone confirm where the distance of 320mm for the tailpiece from the mouldboard is taken from 1/ the original mouldboard or 2/ the extension piece I’ve welded on ? Thanks

Did you ever find out the problem ? I had a similar problem on mine and it was the F/R shuttle lever, original Cobo F/R shuttle lever is available from QTP for half the money that MF sell them at .

After finishing my first ploughing season with the ME, I’ve come to the conclusion that I’ve got to alter some settings, the pitch being one and cutting some more off the bottom of the mouldboards (I’ve already cut 1/2 inch off), I didn’t have to do anything to my super Hydrein I had before ...

Good morning, I made some lovely small bale Haylage this year for my daughter’s pony, I’m of a view that once open, cutting the plastic at one end to form a lid, take out what you need and then wrap it up to keep the air out and to keep it fresh . My daughter started doing this at the stable...

We put it over 120mm composite, you could use it on 40mm composite, Steadmans weren’t that helpful to us as we were using kingspan composite roof sheet’s . I don’t think it will fit on just a tin roof, and it was a lot cheaper than putting a real slate roof on .

https://steadmans.co.uk/wp-content/uploads/2019/10/Meta-SlatePlus.pdf

It comes in 6m strips, you fix a starter rail at the eaves and it clips on with hidden fix .

We put up a composite clad workshop for a customer and he wanted to make it look better as neighbours houses were close, we used a product called meta-slate .

Any steel fab firm could make it, but you’ll need 8’ to keep your feed rain free if you using feed barriers between the posts .