Evening
I have a lely storm and tonight it stripped the interchangeable cogs for setting chop length. I was at my daughters prize giving so i havnt seen it for myself. Been assured everything else is ok but something had to cause it. Im worried that something is fecked in the reversing...
Is that Yara you are waiting on? Just got told the same yesterday and like you, im needing it now. Was no mention of not having any in stock when i ordered it
Managed to get a load of Yara 33.5 for £640 on Friday. I told the mechant if new prices were coming out to book a load as I am needing it now . Been holding off from buying it at 790 to 750 hoping it would drop. I think they only released a few loads at that price. Still need for this season and...
I was slighty suprised as i have never had a quote any less than £685. I know the price was never going to shift much, was more not shelling out the money for as long as possible!
With Putins antics i got the fear and took Yara 33.5N at lunchtime today. £670 delivered, another rep was 695. Yara had already pulled the plug on prices but managed to source some before it was gone
Just of the top of my head they were 4inch but maybe not as big as that. Had to turn the cross shaft as well as the top link was almost right out. Being a tight git i didnt want to swap a heavy duty cross shaft for a lighter one but its far better for me. I have it on a JD so hopefully not a...
I have a 250 and aswell as the cross shaft , it also has 4inch risers on the legs to give more clearance. Also a 250 five furrow can be made to a 6 furrow. I actually got the square cross shaft taken off as its that wide if i was on a steep endrig that arm adjuster was ripping the back tyres as...
Thanks, will have a look. Needs to be well bonded, i think there is shallow studs that were screwed in originally as well as whatever it was bonded with. Would stuff such as no more nails work?
Evening folks
I have a terex 970 digger which has a one piece plastic bonnet. There is a metal bracket that should be attached to it for where it hinges but the metal and the plastic have parted company. I was looking for any recommendations of really good glue/ bonding type stuff to stick it...
530/630 are side pull mowers like the 1365. The main difference is the drawbar on 5/630 is attached to the centre of the machine where the 1365 its attached to the side. According to john deere it pulls more straight across slopes and stops it crabbing as much. The 7/830 are the true center...
530 side pull ,730 centre pivot you can mow either way
630 and 830 the current versions . Only real difference is they changed conditioner tines to pre loaded cast tines instead of free swinging steal V tines. Swivel headstock is slightly different too.
I have had a 1350, then a 530 and now on a 630.
Plus points of 530/630 over a 1365
Not as wide on the road
Lift higher
Cut cleaner, will cut very short grass without spitting it out the side
Can cut faster
The bed can be fixed as its in sections also disc hub will shear to protect bed unlike...
Front hopper for fert. Its a df1 and can hold 3x 600kg if totally empty. Rear hopper i would struggle to get a ton of barley seed in to get lid shut. I dont have wheat but im guessing it would suit a ton of wheat better. I tend to just put a bag of each in when filling but because there is...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.