Recent content by JDJ

Syncromess in forward / reverse will give trouble. And shift between high and low range is also a weak point. The dynashif never gave any trouble on the 8110 and 8150 I had in the past.

Engine is faultless, Bosch fuel pump and it easy to give a 70-100 extra hp. Gearbox is an explosion just waiting to happen!

You can't. But I have created ab curves for all the headlands on my fields. Imo it works better than the auto create form boundery on the newer once. The good thing with using the ab curves is you can pause the recording if you have straight sections on the headlands, then the line will be...

Wheat at 25 cm. Horsch sprinter using jj Metcalfe points.

Will try that tomorrow, however it has plenty of oil and power on the scv. The Oli is in the middle of the sight glass and I changed it when I purchased the tractor. The oil is UTTO GL 4, 80W standard JDM J20C + D

Yes I am pretty sure it's the oile temperature, it shows the same in the small display on the side panel. All the coolers in the front is clean, washed out with water. And the fan seems to run quite ok. When you stop and level the engine running, you can feel that it's sucking air though the...

My recently purchased John Deere 7920 shows high temperature for the transmission olie when doing road work with heavy loads. Yesterday when moving some grain with my hook lift trailer ( 35 tons total weight) it showed +80 ' c. this is my first autopower tractor so haven't got a clue if it's...

Update on the Aurock drilling. looks good on the light and medium soil. But on the heavy clay it had trouble closing the slot. We should probably have raked at an angel before rolling to help it a little bit. Our own Sprinter had no trouble close it. Kuhn on medium soil Clay Horsch...

Horsch Sprinter "notill edition" with self made disk openers in front of jj Metcalfe points Jacob.

Horsch Sprinter "notill edition" with self made disk openers in front of jj Metcalfe points Jacob.

If you are a few behind it sometimes helps to install the software after the one you have now and then the next one etc. Our maby it's just the latest version on stellarsupport not working properly, I have the August/september one in now and mine don't want to install the March version either...

Did you get it to work? My 2630 is able to it. What software version are you running? You can do the update yourself from stellarsupport. Jacob.

More pictures

This thread is manly just for information, but it would be great to hear comments and opinions on the machine. During the last days of our spring barley drilling an old friend now working at the Danish Kuhn import called me and asked if I was interested in trying their new model of a No till...

I have Blaupunkt Barcelona radio's in both my 6939, 7530 and 7920 they are fitted with a long flexible microphone. Work well both, hands free phone, radio and Bluetooth streaming music. Better than most i had previously.