Recent content by JDKing

  1. J

    Mounted sprayer

    Thanks for the response by everyone, I should mention that all spraying is done without tramlines and 90% is grassland. Thanks again
  2. J

    Mounted sprayer

    Evening all, We are looking to change our mounted Kuhn Optis 1200L 12M 2018 sprayer. This has been a seriously good machine both strong, well designed and more important than anything 100% reliable. It hasn’t got a serious amount of mod cons just electri on/off, hydraulic slant & hydraulic up &...
  3. J

    6520 Manual shuttle problem

    The old cable didnt seem to have much wrong with it but I changed it in case but as stated no better.
  4. J

    6520 Manual shuttle problem

    I’ll be honest it wasn’t a genuine cable as it was 1/3 of the price. It seemed to fit ok though.
  5. J

    6520 Manual shuttle problem

    Hello, Our 6520 SE 2006 manual shuttle is not engaging like it should recently. It engages perfectly when you push the lever manually on the side of the transmission. I’ve changed the cable but not really any better. There was quite a bit of wear where the cable connects to the shuttle lever on...
  6. J

    Claas liner 3500 chucking tine arms off

    Just wandering if anybody else has ever had this problem of this type of rake chucking off 4-5 tines off randomly the same time. it always does it on the same rotor. I’ve changed all the wire clips and still does it. Also put oil on the splines. Thanks and thank you for any help.
  7. J

    John Deere reducing dealerships

    I don’t really want to let the cat out of the bag in case of incorrect information sorry!
  8. J

    John Deere reducing dealerships

    Have a certain 2 large JD companies in the midlands merged very recently? Heard on the grapevine today.
  9. J

    John Deere reducing dealerships

  10. J

    Kuhn Sprayers any good?

    I’ve got a 2018 Optis 1200 and literally can’t fault it.
  11. J

    Fertiliser Price Tracker

    Just looking what CF Heartland sulphur (24.8.8.8) is doing at the moment per artic load? Would take delivery soon if helps. Thanks
  12. J

    Contractors ,Silage cost by the ton

    The Contractor charging per load is James Stepside, He won Contractor of the year back around 2006 I think.
  13. J

    Best Lime source

    Thanks, as far as I know they don’t do mag in Nash Rock Kington. We used to get it from Oswestry but they’ve also ceased! Thanks again.
  14. J

    Best Lime source

    Good quality??
  15. J

    Best Lime source

    Just looking for a good quality magnesium lime source in Wales or not too far across the border, last lot we had had chippins in it and our seed specialist wasn’t very positive when he saw this and said this wont work for 10 years!! We have re-sampled the field but not had the results back yet. TIA
Top