Recent content by jhorr30

  1. jhorr30

    Combine pulley wobble

    We had a box fail on a tx68. Was cheaper to buy a brand new box from manners combine breakers than buy the parts to repair our own one.
  2. jhorr30

    Large grain merchant gone under.

    He hasn't lost it. It's been stolen by crooks
  3. jhorr30

    Cnh trimble auto steer

    It's in the calibrations screen.
  4. jhorr30

    Cnh trimble auto steer

    Will try and find out.
  5. jhorr30

    Cnh trimble auto steer

    Would be a Caseih supplied sensor. Have had some progress since I posted originally. The dealer has spent some more time on it and did something to valves on the steering orbital unit. Since then it's been a different machine. Mostly averaging 1.4cm offline now. It's now doing what we thought...
  6. jhorr30

    Cnh trimble auto steer

    To be honest I have never noticed.
  7. jhorr30

    Cnh trimble auto steer

    It's all set up for the model of tractor and when checking the centre mark with a pointer through the drawbar to a marker on the ground it is dead on. Within 1-4mm normally.
  8. jhorr30

    Cnh trimble auto steer

    Quick photos of the settings on the tractor
  9. jhorr30

    Cnh trimble auto steer

    I will suggest that to the dealer
  10. jhorr30

    Cnh trimble auto steer

    Will have a look
  11. jhorr30

    Cnh trimble auto steer

    It's doing it with no implements on it. No hydraulic fan running to cause any issues with it. It's like it isn't telling the valves to open and correct the steering until far too late.
  12. jhorr30

    Cnh trimble auto steer

    All done by a NH dealer. They are at a loss as well. Had new angle sensor, wiring, updated software several times. Tried different nav controllers, and dome as well.
  13. jhorr30

    Cnh trimble auto steer

    Have a case ih puma 230cvx steer ready from the factory which was fitted with second hand nh rtk auto steer equipment almost 2 years ago. Has never worked right since it was installed. It just won't drive straight. It can be up to 30cm off line at times but is mostly 3.5-15cm off line. It is...
  14. jhorr30

    Sprayer wheels

    We bought a second hand hardi commander 4400i 28m sprayer in the back end. Havent used it yet but we have put a set of 18.4r42 on it. We spray our 40ha of potatoes with a tractor on 18.4r38 tyres anyway so hope there isn't much more damage to the ridges. If we didn't have potatoes we would...
  15. jhorr30

    Nail gun

    We bought a hikoki battery nailer after using paslode guns for years for repairing tattie boxes. Always had issues with misfires, and lots of niggles with the paslodes. Have 3 of them and always had one getting serviced/waiting on parts. Keeping on top of cleaning them and using genuine paslode...
Top