johnboy87's latest activity

  • J
    johnboy87 replied to the thread Siloking weigher.
    I dont know that much, all I did was go through the process to eliminate the cells, none of them showed up as faulty and once connected...
  • J
    johnboy87 replied to the thread Siloking weigher.
    This may help as well then
    • 1000002847.jpg
    • 1000002848.jpg
  • J
    johnboy87 replied to the thread Siloking weigher.
    That's the test procedure I used
    • 1000002846.jpg
  • J
    johnboy87 replied to the thread Today at work.
    Not posted in here for a while so best have a catch up. Starts off with working ground with the recently acquired woods on the demo...
    • Screenshot_20230524_221253_Photos.jpg
    • Screenshot_20230524_221259_Photos.jpg
    • IMG-20230502-WA0002.jpeg
    • Screenshot_20230524_221903_Photos.jpg
    • Screenshot_20230524_222152_Photos.jpg
    • image.jpg
    • Screenshot_20230524_222533_Photos.jpg
    • Screenshot_20230524_222836_Photos.jpg
    • Screenshot_20230524_223143_Photos.jpg
    • Screenshot_20230524_223149_Photos.jpg
    • Snapchat-1302474744~2.jpg
    • IMG-20230518-WA0000.jpg
    • IMG-20230519-WA0003.jpg
  • J
    johnboy87 replied to the thread The Demo Thread.
    If you wind it right in then it should stand up a bit more, but will still be looking forward
  • J
    johnboy87 reacted to cornishking's post in the thread Lely/tulip parts with Like Like.
    I'm pretty sure that you can get the powerharrow parts directly from Teagles. Kramp have a very large selection of lely/tulip parts...
  • J
    johnboy87 replied to the thread Lely/tulip parts.
    i think teagle were doing the fert spinners at one point, but not sure if they also did the powerharrows
  • J
    johnboy87 reacted to James's post in the thread The Demo Thread with Like Like.
    That's with the engine off and ignition on tho Actually just tried it with engine on and it worked
  • J
    johnboy87 replied to the thread The Demo Thread.
    Doesn't look like it, the lower 4 are all blank and don't light up 👍
  • J
    johnboy87 replied to the thread The Demo Thread.
    I shall try that when I'm back on it 👍
  • J
    johnboy87 replied to the thread The Demo Thread.
    When trying to explain it over the fone earlier (I'd gone ploughing and they wanted the shear grab off) it felt long winded and complicated
  • J
    johnboy87 replied to the thread The Demo Thread.
    Tried that, when pushing to 2 buttons with just the ignition on it just locked the electric spools (illuminates the lock switch by the...
  • J
    johnboy87 replied to the thread The Demo Thread.
    Many thanks, was just checking there wasn't an alternative to going into the menu and switching it off 👍 will probably leave it switched...
  • J
    johnboy87 replied to the thread The Demo Thread.
    Only been near the tractor this morning to confirm that yesterday (my day off) something had happened to cause the door to start hitting...
  • J
    johnboy87 replied to the thread PTO guard rant.
    Had a similar opinion of the twin tub strautman feeder wagon I used to get tasked with greasing as the shaft and gearbox guards were...
Top