Karlis's latest activity

  • Karlis
    Karlis reacted to charlie@horizon's post in the thread Horizon DSX experiences with Like Like.
    Hi all Following on from my post in June I thought I would give you an update on this new larger 8m & 9m DSX platform because the wait...
  • Karlis
    Karlis replied to the thread Horizon DSX experiences.
    no problemo. row cleaners on every row unit. buckwheat volunteers have already been frost killed.
    • 5ccad4fa-132b-455a-948b-83d4f4b4e077.JPG
    • bda4008c-7901-4c84-9c58-109a191d0f0e.JPG
    • IMG_7403 2 Large 2.jpeg
    • IMG_7411 2 Large.jpeg
    • IMG_7666 Large.jpeg
    • IMG_7668 Large.jpeg
  • Karlis
    Karlis replied to the thread Horsch avatar for no till seeding.
    Horizon DSX manages better penetration with far less weight which is important. Been there and done that with beans on heavy clay...
  • Karlis
    Karlis posted the thread RDS Artemis seed drill controller issues in Precision Farming & GPS.
    Hi, Has anyone had issues with tramlining valves controlled by RDS Artemis? Occasionally one side of the tramlining valves do not get...
  • Karlis
    Karlis posted the thread RDS Artemis metering unit on/off switch in Precision Farming & GPS.
    Hi, Could anyone help if there is an option to fit a physical switch to manually turn metering units on/off? The GPS switch at the...
  • Karlis
    Karlis replied to the thread Horizon DSX experiences.
    A report from Latvia. Some WOSR on 40 cm spacing drilled with rowcleaners adjusted to work aggressively ( 90% of wheat due to the storm...
    • 6790FDF1-BC56-4D6D-ACDB-813D8092D2C2.jpeg
    • F29646E1-F779-493A-8E71-E2C575CB2393.jpeg
    • A7AA4038-8317-44D3-A2B9-4ED2201CEC61.jpeg
    • 65FD0FBC-5258-4A51-94A3-97C2B6CA9B16.jpeg
    • 210D2069-45A0-40AC-98A9-E1BDD652AF65.jpeg
    • 57FD09A2-E8F9-41BC-8651-2209F64C9D4A.jpeg
    • DE269009-5D48-485F-AD44-D43B09E29C53.jpeg
    • 32ACA80A-F62A-40D7-ABE0-C8DAE2057BF1.jpeg
  • Karlis
    Karlis replied to the thread CHC Nav.
    What parts are you missing (been broken?). We have installed few of those and so far works without any issues. They have warehouse in...
  • Karlis
    Karlis replied to the thread Strip till.
  • Karlis
    Karlis replied to the thread Horizon DSX experiences.
    They are set to work anywhere between 10-60 bar of down pressure. On cultivated soils we are typically using mostly 10 bar, in direct...
  • Karlis
    Karlis replied to the thread Horizon DSX experiences.
    We have tested DSX drill in Latvia in heavy clay soils versus Novag and Avatar drills. By far the most capable dril notill disc drill...
  • Karlis
    Karlis reacted to alomy75's post in the thread Low disturbance subsoiler? with Like Like.
    Picked this up today; combine hasn’t sunk at all this year on most of my fields apart from the blacker stuff so will try it out on...
  • Karlis
    Karlis replied to the thread Low disturbance subsoiler?.
    Are these Ultralite tines ?
  • Karlis
    Karlis replied to the thread Mzuri Drills.
    There are few of these in our area. 4 m require around 300 hp, I have not seen a smaller tractor than quadtrack, xerion, rx or tracked...
Show older items
Top