Laurentiu's latest activity
-
Laurentiu replied to the thread New Holland error code.My angle sensor do thr same error...you think that if i turn of the sensor from hh menu 14016 error will dissapear too? -
Laurentiu replied to the thread New Holland error code.Hey you resolve the problem? My t7060 do the same thing..
-
Laurentiu replied to the thread New holland cr 980 E 0515 L stubble height error.Yes hang enough, but error code apear only when i hook up the header rise it above the trailer , but not connected with the electrical...
-
Laurentiu replied to the thread New holland cr 980 E 0515 L stubble height error.Nooo, the header is of the combine on the trailer suport, or it must be link to the combine to adjust it??
-
Laurentiu replied to the thread New holland cr 980 E 0515 L stubble height error.Ok, i ll try that!! L stubble height sensor is that sensor under the header in the left ? On that iron plate?
-
Laurentiu replied to the thread New holland cr 980 E 0515 L stubble height error.I try to calibration the header, but it don t let my, because apear the error code and stop the calibration procedure
-
Hy guyz,have a NH cr 980 and this summer apear on my info view monitor E 0515-00 error code , says it E0515-05 – L Stubble Height /...
-
-
Laurentiu replied to the thread New Holland t 6080PTO.Thank you del boy💪, i will try this and then see if i solved the problem
-
-
Laurentiu replied to the thread New Holland t 6080PTO.Thank you del boy, yes i got acces to the diagnostic, but if it can be disable i want to disable, because i don t need(use) that...
-
Laurentiu replied to the thread New Holland t 6080PTO.Can i eliminate them? ( the rear pto fender switches) or bypass them somehow? Can anyone tell me how please?!
-
Laurentiu replied to the thread New Holland t 6080PTO.At my t7060 is the fender switches , once in a while the 5034 error apear, then i take out the buttons and take back , and the error...
-
Laurentiu replied to the thread New Holland t 6080PTO.Hi, you solved the problem? How?
