Recent content by Laurentiu

  1. Laurentiu

    New Holland error code

    My angle sensor do thr same error...you think that if i turn of the sensor from hh menu 14016 error will dissapear too?
  2. Laurentiu

    New Holland error code

    Hey you resolve the problem? My t7060 do the same thing..
  3. Laurentiu

    New holland cr 980 E 0515 L stubble height error

    Yes hang enough, but error code apear only when i hook up the header rise it above the trailer , but not connected with the electrical plug, Also even when i connect the electrical plug still the same error, The error disapear when i m in harvest mode low to the ground, and when i rise up the...
  4. Laurentiu

    New holland cr 980 E 0515 L stubble height error

    Nooo, the header is of the combine on the trailer suport, or it must be link to the combine to adjust it??
  5. Laurentiu

    New holland cr 980 E 0515 L stubble height error

    Ok, i ll try that!! L stubble height sensor is that sensor under the header in the left ? On that iron plate?
  6. Laurentiu

    New holland cr 980 E 0515 L stubble height error

    I try to calibration the header, but it don t let my, because apear the error code and stop the calibration procedure
  7. Laurentiu

    New holland cr 980 E 0515 L stubble height error

    Hy guyz,have a NH cr 980 and this summer apear on my info view monitor E 0515-00 error code , says it E0515-05 – L Stubble Height / Flex L Line Disconnected I read in service manual that the sensor must be between : The proper voltage range for a properly adjusted sensor is 2.5 to 7.5 volts...
  8. Laurentiu

    New Holland t 6080PTO

    Thank you del boy💪, i will try this and then see if i solved the problem
  9. Laurentiu

    New Holland t 6080PTO

    I think this is
  10. Laurentiu

    New Holland t 6080PTO

    Thank you del boy, yes i got acces to the diagnostic, but if it can be disable i want to disable, because i don t need(use) that switches. Can you tell me how to disable them?
  11. Laurentiu

    New Holland t 6080PTO

    Can i eliminate them? ( the rear pto fender switches) or bypass them somehow? Can anyone tell me how please?!
  12. Laurentiu

    New Holland t 6080PTO

    At my t7060 is the fender switches , once in a while the 5034 error apear, then i take out the buttons and take back , and the error desapear, that means 100% is or the fender switches or the wires that come to them..
  13. Laurentiu

    New Holland t 6080PTO

    Hi, you solved the problem? How?
  14. Laurentiu

    HGS smartsteer new holland cr

    Hy, Have a NH cr 980 combine, An error came up on display, A 2012 HGS error, anybody know what means? I search in service manual and don t find this error. I think is from the smartsteer. Have some ideeas? Thanks.
  15. Laurentiu

    New Holland combine error code

    Hy, Have a NH cr 980 combine, An error came up on display, A 2012 HGS error, anybody know what means? I search in service manual and don t find this error. I think is from the smartsteer. Have some ideeas? Thanks
Top