Lincs Lass's latest activity

  • Lincs Lass
    Lincs Lass replied to the thread Greasing plough boards.
    Old grease bucket with a mix of gear oil and grease ,,warm it up and paint onto fresh bright metal ,,it clings much better than using it...
  • Lincs Lass
    Lincs Lass replied to the thread Setting plough discs.
    Back furrow landslide(or slipes) or as I've known them looks short ,the dp7 we had had a longer ones and the back furrow and the breast...
  • Lincs Lass
    Lincs Lass replied to the thread Setting plough discs.
    Take all the middle ones out and leave the back one to cut the furrow wall clean ,,skimmers will deal with the trash better
  • Lincs Lass
    Lincs Lass replied to the thread machinery storage.
    At least you have a tele handler just incase the the horse dies in the stable ,,you have something to pull it out ,, note Dead horse in...
  • Lincs Lass
    Lincs Lass replied to the thread machinery storage.
    Machinery is worth more than horses ,kick.them out and store the machinery ,its cost more to repair
  • Lincs Lass
    Lincs Lass replied to the thread What sort of hitch is this.
    https://www.kramp.com/shop-gb/en/vp/trailer-hitch-scharm%C3%BCller--ticItemGroup-47696130?categoryId=web3-4055413
  • Lincs Lass
    Lincs Lass reacted to Steevo's post in the thread Cordless drills with Haha Haha.
    What I’m looking for a cordless drill I’m not sure the feature “it’ll break your wrist” is one that would attract me if I saw it on the...
  • Lincs Lass
    Lincs Lass replied to the thread Cordless drills.
    Trust me if you dont use the the insanely long handle and it grabs ,,you wont have time to let go of it ,,it will either dislocate your...
  • Lincs Lass
    Lincs Lass reacted to Steevo's post in the thread Cordless drills with Like Like.
    Makita seem to do 101 different cordless drill models now. @Lincs Lass will know the differences!
  • Lincs Lass
    Lincs Lass replied to the thread Cordless drills.
    Makita DHP 481 ,,the dogs watsits of drills ,,it will break your wrist ,,around the £150 mark or less if you shop about ,,its the full...
  • Lincs Lass
    @masseybreaker is your man for full advice for how to plumb it in and where from
  • Lincs Lass
    One spool feed needs to have a float side as the lift rams on the 80 loader are single acting do when its lowered, you dont want a...
  • Lincs Lass
    Lincs Lass reacted to Old Boar's post in the thread Gravy. Settle an argument with Like Like.
    If you can stand on it, it is too thick.
  • Lincs Lass
    You will need to T the connections for the loader in under the cab floor and then run two push fit conections to the right side under...
  • Lincs Lass
    Lincs Lass replied to the thread Best chop saw ?.
    I think the evolution would struggle to cut 2 inch angle steel ,,it rotates to fast ,,the Raptor is the steel cut of model but its £250...

Forum statistics

Threads
184,584
Messages
4,203,223
Members
46,241
Latest member
InnovateFarm
Top