Recent content by Loadshead

We have one aswell doing just the same what a total ripoff

Had a Lely front and back mowers with conditioners and in heavy crops they would block the conditioners up. We replaced slip clutches,conditioner belts,conditioner tines even had two men from Lely to come out and they tried to do a so called modification on the back one but they still blocked...

Try digbits I have found them very good and helpful

If you have set pto in tms as you have said just set the min revs closer to you max revs,also if you are in 540e it will not let it rev over pto speed.

Hi Rusty Bit of subjects but which beaker did you get pto of as would like a front linkage for my 7710 but don't warrant a new one as only want it to put weight block on instead of lifting weights on and off

You can get a blanking plate to block it off. Also like treemover had a 05 reg 818 that kept blowing intercooler pipes off

Put a stainless pipe on a 6495 sounded grate for first 5 mins then made your ears bleed after that. Still got it in the corner of the workshop if you're interested

Also Howard marshall 01159 630011 make them

. Got a new habiscus rake this year and half way through 2nd day the weld on the rotator boggy axle broke and spoke to someone called JONATHAN that was going to sort it and get a new one sent but said weld it for now. still no axle call him 3 times since but he does not answer and left a...

Have you tried bill bennet engineering they do hitch systems

Has anyone had any Problems with Kuhn or pottinger?Looked at them at lamma Also spoke to leyl at lamma and there is a Modification to the hud they might do, But must agree with you Andrew they are not Bothered at all. Also the conditioner does not throw the grass out of the back of the mower...

I have a front and back lely splendimo and last year the grass just wrapped round the conditioner no matter what I did to the hood. Some fields and crops they mowed fine but then others just could not get it to stop wrapping round,had to keep ringing a mate to come with his that had not got a...

Hi Will Have you thought of the Yorkshire show its a good little show as long as it does not get rained off again

Hi all, I just wounded if I can make my old 6910 load sensing to us on a bale wrapper and if possible where to tap in to get control line and pressure line. Many thanks

Was that you lot on radio derby this morning ?