Happy days,
Barry at CJ's tracked it down (a "joint", per Kioti) courtesy of my emailed image, and voila, yours today Sir, for the princely sum of £7.13 +VAT,
so I ordered an heir an a spare!
He also "pinged" me the part number for future reference.
marcus, the happy hat
Barleycorn,
I was NOT impressed, especially after first getting a halfwit called Jenny, who kept asking "did it control the brakes" and other such quite unrelated nonsense, after I had used key words like "loader" hydraulics" "valve block" "cable assembly".
She must have been on a Friday...
Mur,
Having spent the last 3 solid days tidying my shed(by pure overdue, like about 10 years overdue, happenstance),
I have been through my "lucky dip" boxes, but since this is my first ever loader, it would be unlikely that I had such bits squirreled away.
thanks again,
marcus
Looking on the...
Thank you for such a rapid response Mur.
So.
The threaded rod is 5mm dia and standard metric tread(because I tried the clevis with a cutting of threaded rod)
the stubby cross pin is 8 to 8.5mm in dia.
see images.
2nd image not the best, I might get better after dark when the flash will work.
Being the pot-metal "gubbings"(is it a clevis?) that connects the bowden cable to the valve block(i.e. down at the valve block) for the loader.
Cyril Johnstons are telling me I will need to order the entire cable assembly.
But the failed component is a screw on easily replaceable part so I was...
https://www.equipmentworld.com/jcb-smashes-world-record-for-fastest-tractor-with-103-mph-run-with-1000-hp-fastrac/?utm_source=daily&utm_medium=email&utm_content=06-25-2019&utm_campaign=Equipment%20World&ust_id=a7a01c466b78115d2c3452cac1cc2dd2
I hope this has not already been posted elsewhere ...
It must have been another grease gun thread, but someone was asking about a source for Pin and Bush grease in the 500ml screw in Fuchs type cartridges, I could not find them either until I stumbled across the Maxol brand in a local Ag supply place this morning.
mth
Well seeing as me, being a scrawny 60 year old Ex desk jockey, i.e. not a brawny farmer nor fitter, just bust a Fuchs copycat grease gun today (& bought from a reputable local supplier), it will be the genuine Fuchs next time.
cheers
mth
EDIT;
After fruitless searching I am perplexed that...
Happenstance I came across this, see link
https://whitelabel-2.globalauctionplatform.com/en-gb/auction-catalogues/wca/catalogue-id-witham1-10000/lot-31671be5-1751-4793-9e3e-a9a600f385d8
No idea of condition or value, merely a "heads up" .
cheers
marcus
Well with a Mexco 6mm thick by 125mm dia diamond raking disc, I cut a 4.0m long track(for lead flashing) with a fully charged 4.0 AmpHr battery, about 25mm deep, quite impressive performance for such a handy cordless tool I thought.
Admittedly only through marble dash and scratch coat and just...
My farmers son intuition/uncommon sense was absolutely correct, & see HSE linked document;
Peripheral and rotational speed
28 The maximum operating speed is marked on every wheel in two ways:
(a) the peripheral surface speed which is given in m/s;
(b) the rotational speed which is given in...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.