Have a 7720s massey from new, recently fitted auto steer and it’s ran off the speed steer, all worked okay for first 30-40 hours but now the speedsteer works for an hour or so then stops working, no error or nothing, anyone ever have this ? I read somewhere it could be calibration error
Hi, I have a tx66 with a 20 foot head. When I engage auto float the header fully tilts to one side. When l lift the paddles by hand the head goes up and down but it’s not tilting left or right. I have cleaned the sensors, cleaned all the connections, calibrated it, all with no luck. The sensors...
Hi all
What are the settings roughly for a tx34 in winter and spring barley? I don’t think I have deawning plates will this affect me ? Also which grove should the belt for the rotary separator be in ? Small outside grove or big inside for controlling the separator spreed
Just got a look at the sensors today, most have had there wires cut or the sensors are removed, does anyone know roughly the price of the sensors for the RPM monitor ? I might change them all, also the grain loss monitors, where are the sensors and what price are replacements? Do some tx34’s...
I’m probably very far from you I’m in Ireland. Was looking at the beater sensor today and that is broke at the wires, I expect similar for the rest of them and the light is constantly on for the beater so that’s probably a lot of the issue too
Well lads, I plugged the electric ram into a battery charger today and it straight away started to move, I let it move until level, then plugged it back into combine, as soon as the trasher was put going it went fully sidewards again whatever that means. I then levelled it again with the battery...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.