i wouldnt bother it will tell you whats wrong but unless you know what to do to repair it you are going to need your dealer and the first thing they will do is plug in
it opens the trailer brake valve but if there is no trailer does it shout for oil or not ? but if the steering is turning the oil will go there so the pump fires up . thats a possible cause but i could be wrong
its worth cleaning that also from what you have said its the sensing line from the steering that isnt firing the system up so the valve isnt getting a signal or something is sticking somewhere
normally i would say the orbitol is the problem but you have swopped it .it looks like the outer slice that isnt demanding oil take the valves out and clean them you might get away with it
be carefull @Cowabunga thats a carraro axle the pipe from the block to the ram has plenty of pressure in it . i havnt found a way of dropping it out properly yet there is a a plug on the block but it tends to shear off then you need a new block
the hose needs connecting to the top fitting in the side cover that has the blanking plug on and then fit the blanking plug to the t piece at bottom it should work then
the sensor in the center at the bottom of the side plate in photo 2 needs fitting to your other side plate . it senses the temperature of the oil if the oil is cold it stoppes the dynashift working
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.