Thank you for your reply, did yours go in to neutral when going down hill? Also I think it’s done it when the mechanic drove it in pedal mode and stopped quickly.
Hi all, I have a massey 7480 tier 2 with about 6700 hours on the clock. I have an issue with the vario jumping into neutral when you go down hill. When it faults I have the hare and tortoise light flashing between the to. I have had someone come out and have a look at it. They think it might be...
When we tried the Ecu last time it worked fine. I’m sure it’s the same Ecu so am a bit confused and fed up with it all now!!’ I will change the filters but not holding out much hope that,that is the problem.
It is revving flat out. But when you go up a hill you can watch the Rev counter drop and then go back up again!!! Topping up a bit of steep yesterday I thought it was going to stall. Revs went from 540 right down to below 400 😳
Sorry to bore everyone and keep bringing this thread back to life!!! The dealer came out and has put a new Ecu on. I don’t have any fault codes or flashing warning lights. What I do have it’s like it’s hunting for fuel! It struggles to go flat out on a main road and up some hills you think it’s...
Yes I would say it is. But the other day when mowing the temperature charge was reading hotter then, wirh no lights or error code. But today the temperature charge was normal.
Mine is a 56 plate but it was registered in early 07. I’m just at a loss with it and so are the dealers I think. They checked the loom and couldn’t find any problems.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.