Recent content by Mr Wendal

Not very good picture and no real help but our old 165 which is long gone was from wests in horncastle (now Chandlers)

Thought maybe so.

If you want another one for spares we were going to out ours as it doesn't cut quite straight anymore, probably just worn though use.

Personally I felt the software control the auto functions of the gearbox was written for vario box and made to work with gears and it doesn't do it very well. See how you go.

Had a 8s.265 vt since mid October, not done masses with it as it won't stop raining but its lot nicer than a Dyna 7 to operate. Only real issue is with AC freezing up, it's had one frost stat but not been warm enough to really test it since fitted.

Probably not in right location for you or right size etc but coming up this week...

I use an Ontrac 3 with Incommand on a Bateman. On on egnos so quite drifty when come back to fields each time. Doesn't really answer your question but you'd want to have steer command and rtk I'd say as the Ontrac wouldn't do what you want. Think there is a replacement for Ontrac now which might...

Yes, father is on w4idb.

Hi, did you manage to get your issue sorted? I have a Venta 3530 but the issue I'm having is with variable rate control. Changed tractor this autumn from 7700 series Massey to 8s. Worked fine with 77 not so keen on 8s. Using topcon x35 as terminal. Thanks

Same with old 550 but not in 660 book. 🤷‍♂️

I couldn't find it in the book either, claas dealer sent this. Hopefully you can see it ok. Think basically one cross auger want to be delivering onto start of main auger flighting, then the second one as the main rotates to face it.

https://basurishop.com/ think it's a version of these.

There's one for sale on Bateman website under used parts. https://www.batemansprayers.com/lh5000-rate-controller-ref-091020c/

I have got myself one of these cables from ebay and connected up a standard camera to it, I can get a good picture on the data 4 screen but quite frequently it will get stuck between the camera picture and the tractor screen, and end up with a mix of both images on the screen, non of the buttons...

Have discovered that it is possible to transfer boundaries, without the use of the wayline converter, just with usb stick. Done by importing each field boundary shapefile individually from the usb stick. By drilling down from clients,farms, fields, boundaries then highlight boundary shapefile...