MikeNeaverson's latest activity
-
MMikeNeaverson replied to the thread Cost of a 1000 ton grain store.You're right though, you *could* build one for £105k if you were on good ground and wanted a basic spec. Which I don't and is why your...
-
MMikeNeaverson replied to the thread Cost of a 1000 ton grain store.Managing individual contractors but not physically doing anything myself. TBF it is on an existing stone yard so no stripping or stone...
-
MMikeNeaverson replied to the thread Cost of a 1000 ton grain store.Building a modified version of that kit at the moment. You could do it all in for just over £100k with lighting, doors, concrete etc...
-
MMikeNeaverson reacted to SilliamWhale's post in the thread Should Tom Bradshaw resign from the Nfu? with
Like.
I was looking for the articles of association earlier, so thankyou. Out of interest you know when NSF CMI write to you with a letter... -
MMikeNeaverson replied to the thread GL32b grimme spud planter.If it was wet I often had to put three or four wafer weights on the hood to keep the pressure up. Mine was getting long in the tooth...
-
MMikeNeaverson replied to the thread 36m sprayer in potato beds.650. You’d think that 2.1m wouldn’t be enough but if you think about the edge of the row and where the disc goes on the harvester, with...
-
MMikeNeaverson replied to the thread 36m sprayer in potato beds.That will work but obviously will require your tractor and sprayer to be set on a wide track width. For me that wasn’t an option for...
-
MMikeNeaverson replied to the thread 36m sprayer in potato beds.I am the same system. I plant 9 on headlands but you have to drive exactly where the 10th would be. If you’re on wides and can’t get...
-
MMikeNeaverson replied to the thread Nozzles for Leeb.I was a devout Guardian Air man for a decade, then on the advice of Simpers TC I tried BFS Bubblejets and they're way, way better. I...
-
MSo after a bit of trial and error it seems the batteries may be a contributory factor. Using the ones off my other tractor will start...
-
MMikeNeaverson replied to the thread Air Source Heat Pumps.I have a 2020 model Panasonic ASHP - does anyone know whether the coefficient of efficiency figures from the controller monitor are...
-
MSorry if this has been covered elsewhere. I'd like to put up a smallish turbine, somewhere between 10 and 20 kw probably, to help run my...
-
MMikeNeaverson replied to the thread Hybrid Winter Barley.Hybrid barley has its place in high yielding situations. 10.2t/ha here this year grown on land that wouldn't have done 8t/ha of second...
-
MMikeNeaverson replied to the thread OSR drill - nitrogen applicator on a budget.I like the look of that but have decided over the years that we're better off drilling OSR with a proper drill after plenty of FYM. Not...
-
MMikeNeaverson reacted to Will 1594's post in the thread OSR drill - nitrogen applicator on a budget with Like.
where abouts are you nev have front tank pump manifold and pipe work pressure gauge you could hire if works mint hydraulic pacer...