Old crofter's latest activity
-
OOld crofter replied to the thread Barford SXR 6 ton dumper 2007.Thanks both, I'll look at plant talk and the ignition switch too. Many thanks
-
OHi folks No experience of heavy plant but I've been asked by a guy on the island to help him with an issue on his dumper. Everything...
-
OWe have been with F & S Energy for years, partly because of their very good customer service.
-
OOld crofter replied to the thread Switching FITs.Thank you for the suggestions, appreciated.:D
-
OWe have a small (domestic) solar array on our roof. I need to change the company I get FITs from (soon before I have a stroke or...
-
OHi I got the rebuilt hydraulic pump and lift cover installed,started the tractor after installing a 3500 psi pressure gauge on a port on...
-
OOld crofter replied to the thread Massey 165 MK2 1972 Hydraulic pump.Right, thanks....I've been looking on the net and the original MK2 pump relief valve is commonly replaced with an on pump relief which...
-
OOld crofter replied to the thread Massey 165 MK2 1972 Hydraulic pump.Thanks for your help so far with the hydraulic system on my Massey 165 MK2... The response control lever and it's actuator arm is...
-
OOld crofter replied to the thread Massey 165 MK2 1972 Hydraulic pump.I wasn't aware there was one, in fact pretty sure there isn't one on my 72 165 standard not multipower. The pump has a gauze and mesh...
-
OOld crofter replied to the thread Massey 165 MK2 1972 Hydraulic pump.Link arms got sorted MFAndy , two of the stubs shifted the other two had to have holes blown through with a propane oxygen torch to get...
-
OOld crofter replied to the thread Massey 165 MK2 1972 Hydraulic pump.Thanks all, I've got a new pump being ordered, it's made in Turkey with a years warranty. There's a bit of info admittedly multi power...
-
OOld crofter replied to the thread Massey 165 MK2 1972 Hydraulic pump.Thanks a lot, that's very helpful... It's not a multi power and I have a mobile engine hoist to lift the top plate . That's tomorrow's...
-
OOld crofter replied to the thread Massey 165 MK2 1972 Hydraulic pump.Pardon my ignorance, how does one fit a pressure tester. I've tried both with the spool valve and the quadrant, neither does lift well...
-
OOld crofter replied to the thread Massey 165 MK2 1972 Hydraulic pump.Yes the oil is clean and up to max level, it just doesn't seem to have enough pressure to lift even the mower blades assembly into the...
-
OOld crofter replied to the thread Massey 165 MK2 1972 Hydraulic pump.The toplink hasn't been changed at all, just as it always was
