Recent content by Pacon85

Ya the o rings are gone hard have to say set ordered hopefully that will solve my problem. Was thinking of changing the springs while I In there wood do no harm spring could be gone soft because it is after rounding the corners of the gear pieces that lock together when 4x4 in engaged from all...

Ok is this the plate

I have my one stripped out My 4x4 was not staying on but coming on when it got Hot or banging when Breaking and we were looking at it and we think it’s where the oil supple comes in to the centre of the main shaft (the square cover) it is not tight fitting in the shaft which we think it should...

Mit be as well put new solinite in 100 euro give or take

Sorry for butting In on year conversation but have 1991 Ford 7610 and my 4x4 is slapping on and off gets worse when tractor gets hot do ye think it is solenoid problem because dual power works fine and it does stay off on road it loading it gets bad have shaft taking off afraid it will bust...

Don’t no if this forum is still active but in relation to the Lely 240L splendimo went went to change gear oil and ball bearing came out with top bleed screw they big job to change?

Well I soppose it is after raining a lot any rotten stuff appears to be gone it’s the dryer waste hay still around cattle grazed it off they act like harrow if summer stays dry could be problem but if I leave it long as I can 10 weeks should be fairly well gone I’m hopeful hay wood be better...

spread fresh dung around paddy’s day no straw just hay silage 50% rotten other 50 not so rotten and was hopeful that I could cut hay off field in middle of July dryer dung still in field.will it spoil the hay or silage?

I spread fresh dung around paddy’s day no straw just hay silage 50% rotten other 50 not so rotten and was hopeful that I could cut hay off field in middle of July dryer dung still in field.will it spoil the hay or silage?