patrickr321's latest activity
-
Ppatrickr321 replied to the thread Diverting water across a track.Hi all. Thanks for so many useful pieces of info. I've got a couple of sections of crash barrier, as it happens which I could stick end...
-
PWe've made a drain and run a pipe on one side of a track that works well at taking alot of surface water away from higher up. I want to...
-
Ppatrickr321 replied to the thread JCB 8014 loss of power.Hi everyone Been tinkering away, off and on between other jobs (as usual). I took out the tank and jet washed it, removed the tank...
-
Ppatrickr321 replied to the thread JCB 8014 loss of power.Thanks! I'll definitely check out the hammer pedal isn't stuck - good thought!
-
Ppatrickr321 replied to the thread JCB 8014 loss of power.Thanks. Yes, I'll give the soldering a go. Question is which way round the cables go - but maybe it doesn't matter.... Will dry the...
-
Ppatrickr321 replied to the thread JCB 8014 loss of power.Really appreciate everyone's help. Sorry, a couple more things: OK, latest: I got the fuel tank out. Actually turned out to be quite...
-
-
Ppatrickr321 replied to the thread JCB 8014 loss of power.Yep, it's the connector(s) on the top of the fuel tank. I want to get the fuel tank out...
-
Ppatrickr321 replied to the thread JCB 8014 loss of power.Sounds like a good idea. Will try that at the end,..... :)
-
Ppatrickr321 replied to the thread JCB 8014 loss of power.Think I can see the bit to squeeze. Squeezing by hand but not shifting. Maybe I need mole grips, long nose pliers..?
-
Ppatrickr321 replied to the thread JCB 8014 loss of power.Was tempted to start a new post - but continuing here. Have seen some improvements with cleaning the lift pump filter (brass gauze) and...
-
-
Ppatrickr321 replied to the thread JCB 8014 loss of power.Thanks. Will do some checking once I get the cab up and safe.
-
PPrimary filter would have been the brass gauze in the lift pump but there may also be an in line filter? Could be old contaminated fuel...
-
Ppatrickr321 replied to the thread JCB 8014 loss of power.I took off the lift pump and didn't find a brass gauze. I'm still looking for a primary filter, and also how to remove the tank. To...
-
Ppatrickr321 replied to the thread JCB 8014 loss of power.Don't know if there is a pre filter in the lift pump. Manual didn't point towards one on my Tier 2 machine - although there is one...
-
Ppatrickr321 replied to the thread JCB 8014 loss of power.Mechanical lift pump. It's a Tier 2 machine. We primed it with the lift pump and fuel ran out of the bleed screw easily.
