Recent content by Peaceagri

Wow nobody would even try to crop farm that around here, it would have a herd of cows on it.

Have a t7.315 since 2019, great tractor and fantastic engine and transmission. Was something wrong with the A/C but was fixed under warranty. Trading my 2015 T7.270 on new T7.300 with loader when it arrives next spring.

If you grab a big big wad of grass the rollers can jam and then you smoke the clutch. This only happens when you drop the mower to the ground and ‘mow’ an existing swath/windrow, the cut material doesn’t flow through the rollers properly and jams it up (this can be avoided by driving slowly...

Tow behind for the bigger volume, and quick connection and go (drop a pin and go).

Ordered July 29,2023 and I am told Q2 of 2024 arrival. T7.300 with loader

Not an option, 5 years old

I have a v10 with about 100hrs on it. If I play with the ground pressure adjustment, the left mower pops up, the only way to keep it down is to run at max ground pressure (minimal float). What could be wrong here, is it one of the solenoids? Hard on skid shoes and I will wreck something if I hit...

Yes free flow return, thanks guys.

I need a case drain line from an implement hydraulic motor, can someone confirm which line I would use as the case drain (return to tank). I have the three power beyond connections, I believe I should be connecting to the large top Return Oil Line, correct? (Labelled as (1) in the manual) Not...

Yes they are the same, choose the color/price/cab/control layout you like best.

Thank you. Searching shows nothing for me.

I can't find anywhere that states what differentiates a JCB Agri spec loader from a non-Agri spec, does anyone know? Specifically I am looking at a 427 Agri vs standard 427.

Make sure you buy a gen rated continuous duty, not standby duty. It will be stamped on the tag.

Looking at this used wheel loader, approx 5500 hours. It looks fairly clean. How reliable are these? I am looking for a high lift loader, this specs well in terms of lift height and weight but perhaps underpowered. Want for stacking 5x6 round bales, couple at a time, loading trucks, grapple...

Does anyone know offhand what ground pressure setting they are running their system at on the controller/isobus? Also, are you using the recommended linkage height settings as per the manual, or something else? Manual says 1370mm to top link on the front and 825mm to lower link on the rear...