PhilipWatkinsLtd's latest activity
-
I've never got this right. My criteria are: Must be 4m min and pulled by 265hp. Minimal moving parts & bearings Must have reasonably... -
PhilipWatkinsLtd reacted to YELROM's post in the thread Fendt 724, heavy rear mounted implement. with
Like.
could you add something like this between the linkage and stone fork when you need extra weight -
On the hunt for a 4.2m Simba Unipress either with or with out tines / paddles if anyone has one or seen one on there travels. Thank you...
-
looking at the above machine does anyone know if the tines can be lifted out of work while the discs and roller continue to work on the...
-
You can't on our 3m trailed one, you could lower the disc unit tho and take a bit of weight on the wheels tho
-
I have a 4m Topdown. No, you can't put the roller down on the move unless you take the shims out so it floats and you put the wheels...
-
-
PhilipWatkinsLtd reacted to its.... only me's post in the thread Push/Pull towing rod advice with Like.
Can anyone give recommendations/ specs. for either making my own or where to purchase a push/pull towing rod/bar suitable for...
-
We looked at all sorts and couldn't just find what we wanted, ended up speaking to Phillip Watkins who built us just what we wanted, few...
-
Not sure if you’ll get an artic but try Philip Watkins. Good build quality Good paint. Delivered on time. Have had a low loader, and a...
-
If it’s made of steel, Philip Watkins every time.
-
Excellent product, the Watkins one.
-
We bought a Philip Watkins weight, very pleased with it, excellent service would highly recommend them
-
We bought 1 about 2 years ago with approx 6000 hrs and a 2nd 1 this year with 9000 hrs. Both are doing okay , they will probably only do...
-
How dare you talk about big tractors on big kit, when I was a lad I pulled a 50ft Dutch harrow in a Dexta at a billion miles an hour and...
