Recent content by Raisbecw

  1. Raisbecw

    Fendt Tigo XR / Lely loader wagon comments

    Hi everyone just after any comment or feedback around fendt tigo/Lely loader wagons. We have experience with Strautmann and Bergman larger tri axle machines but I’m very interested to see how the Agco product has performed Cheers
  2. Raisbecw

    Kubota M7 series 2

    thank you for the information it’s certainly well worth while being informed and especially the need to question parts pricing and even possibly of engine replacements
  3. Raisbecw

    Kubota M7 series 2

    Thank you very much for the honest feedback! I would be extremely keen to possibly talk to a few guys we are hoping to get a good lifespan out of the tractors so anyone who’s got an serious hours would also be very helpful
  4. Raisbecw

    Kubota M7 series 2

    Only when times are desperate haha, we run a fleet of Claas 3600 rakes and need something small simple yet quick on the road for keeping in front of balers and foragers. Roughly tick over 1000 - 1200 hrs a year on them
  5. Raisbecw

    Kubota M7 series 2

    Does anyone run a kubota M7 ? Just looking for any feedback anyone may have on them. We managed to have one out on demo for a few days and was pleasantly surprised. I am looking to use it purely for raking or tedding so not reliant on a highly equipped machine, simple and reliable is the aim...
  6. Raisbecw

    Claas Xerion 5000

    We are currently looking at purchasing a Claas Xerion out here in New Zealand and we have the choice of the Tier 3 or Tier 4 machine, however the dealership isn't able to provide us with any fuel consumption comparison figures etc to compare the two machines. The price difference between the two...
  7. Raisbecw

    Ploughman, Omni til

    Has anyone got any experience/ review on the ploughmans Omni till machines we are looking at the possibility of running a larger trailer machine, they look very well made in person. Any feedback would be great
  8. Raisbecw

    Vaderstad Rexius & Bio drill

    T Thanks Phil that's really good to know, I'd be very keen to see the photo. Cheers
  9. Raisbecw

    Vaderstad Rexius & Bio drill

    Our unit was aftermarket fitted by the dealer to a roller we already owned and from day one we have had a number of problems with the feeder turning off randomly and also the hydraulic fan system would always fluctuate hugely until we replaced the valve block from an open centre to a closed...
  10. Raisbecw

    Vaderstad Rexius & Bio drill

    Thanks for the reply, the ground speed can change a lot depending on how stoney the ground we are working on but typically around the 8-10kph mark. The seeding rate is usually between 18-30kg/ha typically 25kg most of the time. At the moment we are running an APV unit on a 6m roller which...
  11. Raisbecw

    Vaderstad Rexius & Bio drill

    Im currently looking at different options to update our current roller and drill set up which we use primarily for drilling grass seed down for permanent pasture as well as small seeds for green feed winter crops. Does anyone use a larger roller roughly 10 - 12 metres with a bio drill for grass...
Top