Recent content by Ratbadger2

  1. Ratbadger2

    Under sealing Vehicles

    We scratch loose rust off then paint with this stuff called aqua steel very good product which eats rust then some good zinc primer we have got then waxoil over the top keeps things good for a long long time https://aquasteel.co.uk/
  2. Ratbadger2

    anything from ww2 on the farm?

    We have a Jerry can with 1945 stamped on the side one of the only ones that doesn’t leak 😂
  3. Ratbadger2

    Which Impact wrench....?

    Milwaukee I have had the 3/4 gun a few months now bought it to take lorry wheel nuts off absolutely flys through them
  4. Ratbadger2

    International 885-starting problems

    We have an ih 885 starts on the button but we have an old same and we use a plumbers torch in the air intake to get it going won’t start without it and saves it getting the sniff addiction
  5. Ratbadger2

    What did you build over Christmas 2020

    top end rebuild and a lick of paint and away we go 💨💨💨
  6. Ratbadger2

    Led trailer lights

    Seem to spend more time messing around trying to make them work than breaking them 😂
  7. Ratbadger2

    Led trailer lights

    Looking for recommendations for best place to get led trailer lights need to be 12/24 volt thanks 👍🏻
  8. Ratbadger2

    The IH / Case Thread

    Cheers cheers , looked like it would be the case didn’t want to go in gung ho and end up with bits everywhere. What oil does it take for the axle and how much? And this is a silly question what engine oil does it take that’s the last thing left to drop and change 👍🏻
  9. Ratbadger2

    The IH / Case Thread

    this seal has started leaking case 885 is it a big job to change or fairly simple whip the shaft out and put back in cheers 👍🏻
  10. Ratbadger2

    The IH / Case Thread

    I had a good clean up of the earths they are all sparkling now. Will have a look I guess you mean the fuse box ? I can’t believe how much of a rats nest it is wires everywhere and very hard to get too
  11. Ratbadger2

    The IH / Case Thread

    Looking for some advice I have a case 885 with the small cab not flat floor and the electrics have gone berserk. The handbrake lights have been dodgy since we bought it. A while ago high low beam stopped working just low beam on all three switch positions then yesterday the ignition light and...
  12. Ratbadger2

    What type of Grease?

    Local dealer to us is John Deere just there lithium grease has always been good for stuff round here. Bought a jcb recently came with a couple of jcb blue seems nice aswell
  13. Ratbadger2

    Best make of mig welder

    Sip welders are very good and reasonably priced for the spec
  14. Ratbadger2

    quick fixes, bodges and creations

    😂😂😂 lets see if it holds first 🙏🏻
Top