rdr123's latest activity
-
Looking at upgrading our old fella tedder and seen a Malone Tedd-air 840. Just wondering if anyone else has had one and what they... -
rdr123 replied to the thread JCB Dash Screen Delay/false readings.If you pull the plug out the back of the screen to kill the power it resets and is fine then for 5/10 mins. Its as if it gets confused...
-
rdr123 replied to the thread JCB Dash Screen Delay/false readings.Tried all sorts and the dash was reading everything accurately last night but back to being delayed and random this morning
-
rdr123 reacted to willyorkshire's post in the thread JCB Dash Screen Delay/false readings with
Like.
No only the ignition key. -
rdr123 replied to the thread JCB Dash Screen Delay/false readings.Were you turning off the isolator to kill all the power? I've tried that a few times but may leave it off like that for a while and see.
-
Had it had a while back but usually turning it off and on again sorts it out. This time it'll be ok for a minute or 2 and then start...
-
19 plate 538-60, 4000 hrs. Anyone had B1597-13 coming up intermittently? Starting to drive me insane. Have spoke to the dealer but...
-
rdr123 replied to the thread Trioliet Tub Mixer weighing wrong.I've got the new weigh cell....£774! Having an absolute nightmare trying to get the old one off. Local chap with Oxy is coming tomorrow...
-
Sit down when you get the price for a new weigh cell Trioliet = daylight robbery!
-
rdr123 replied to the thread Trioliet Tub Mixer weighing wrong.After playing around with it yesterday I disconnected the wires in the junction box for weigh cells 1 (guessing that may be the one at...
-
one at the hitch?
-
rdr123 replied to the thread Trioliet Tub Mixer weighing wrong.Ah great I could only see 2 weigh cells underneath, above the axles. Will have a look in the junction box and try to isolate the problem.
-
rdr123 replied to the thread Trioliet Tub Mixer weighing wrong.You reckon it'll definitely be a weigh cell and not a connection issue? How's best to work out which one is gone? Thanks.
-
Digistar Ez3600v box Basically it'll be fine one moment then suddenly the weight will jump up from say 4000kg to 35000kg. Yesterday...
-
rdr123 replied to the thread JCB telehandler fault code b1597-13.Hi, did you ever find out what this code was and how to solve it? I've started having it come up frequently. Thanks.