Recent content by rdr123

  1. rdr123

    JCB Dash Screen Delay/false readings

    If you pull the plug out the back of the screen to kill the power it resets and is fine then for 5/10 mins. Its as if it gets confused. Spoke to JCB dealer but they've never had this before so unsure if it is a connection issue or a problem with the screen.
  2. rdr123

    JCB Dash Screen Delay/false readings

    Tried all sorts and the dash was reading everything accurately last night but back to being delayed and random this morning
  3. rdr123

    JCB Dash Screen Delay/false readings

    Were you turning off the isolator to kill all the power? I've tried that a few times but may leave it off like that for a while and see.
  4. rdr123

    JCB Dash Screen Delay/false readings

    Had it had a while back but usually turning it off and on again sorts it out. This time it'll be ok for a minute or 2 and then start playing up again everytime. It's got the newer tablet style dash screen. Makes it nearly impossible to navigate the menu's, gear showing isn't correct...
  5. rdr123

    JCB 538-60 intermittent fault code

    19 plate 538-60, 4000 hrs. Anyone had B1597-13 coming up intermittently? Starting to drive me insane. Have spoke to the dealer but they've never come across that code so are going to speak to JCB. Can't notice that anything isn't working as it should. Somedays it isn't too bad and others it's...
  6. rdr123

    Trioliet Tub Mixer weighing wrong

    I've got the new weigh cell....£774! Having an absolute nightmare trying to get the old one off. Local chap with Oxy is coming tomorrow for round 2
  7. rdr123

    Trioliet Tub Mixer weighing wrong

    After playing around with it yesterday I disconnected the wires in the junction box for weigh cells 1 (guessing that may be the one at the hitch?) Managed to get more stable weights (actually being able to zero it). This morning loading it has been jumping around a bit plus or minus 100kg but I...
  8. rdr123

    Trioliet Tub Mixer weighing wrong

    Ah great I could only see 2 weigh cells underneath, above the axles. Will have a look in the junction box and try to isolate the problem.
  9. rdr123

    Trioliet Tub Mixer weighing wrong

    You reckon it'll definitely be a weigh cell and not a connection issue? How's best to work out which one is gone? Thanks.
  10. rdr123

    Trioliet Tub Mixer weighing wrong

    Digistar Ez3600v box Basically it'll be fine one moment then suddenly the weight will jump up from say 4000kg to 35000kg. Yesterday morning it was fine but this morning it was fine when loading then once I had finished it jumped up to stupid numbers. On quick inspection i can't see any...
  11. rdr123

    JCB telehandler fault code b1597-13

    Hi, did you ever find out what this code was and how to solve it? I've started having it come up frequently. Thanks.
  12. rdr123

    Need help for JCB Telehandler fault codes.

    Hi, did you ever solve this issue as my 2013 536-60 has decided to throw up all of these codes this morning. Thanks.
  13. rdr123

    JCB 536-60 Fault Code u040d-54

    Was the TMAP sensor
  14. rdr123

    Trioliet Mixer Problems

    3 spools, so you've basically done away with the electric control box?
  15. rdr123

    Trioliet Mixer Problems

    We recently bought a Trioliet Solomix 2-2400 tub mixer (2011) and there is an intermittent issue with the door and conveyor working. Sometimes it works fine and then just cuts out. And other times it won't work at all. Seems more electrical than hydraulics as the rear door and side shift works...
Top