Recent content by Right-arm fast

  1. R

    Rats

    Whats the situation with red tractor rules and using rat poision these days?
  2. R

    Replacement of old gutters

    The gutter sections arent great - got moss on them, i dont fancy messing around cleaning up the asbestos to get a decent seal. Just want to get them down and go with the right size plastic preferably. Plus the down spouts
  3. R

    Replacement of old gutters

    Thats it, they are very deep for a 6" gutter. Would you know where you get them from?
  4. R

    Oldest machine on farm, dead or alive.

    Pollard pillar drill, circa 1940, then 1980 Yale Eaton forklift.
  5. R

    Replacement of old gutters

    Thanks, were they ordinary domestic gutters? The shed has corrugated tin sheets above concrete walls, would you have to screw boards on under roof sheets to screw the brackets to?
  6. R

    Replacement of old gutters

    Hi, Need some advice on replacing the gutters on an old 60'x30' shed from circa the 1970s. It has the original asbestos gutters which are sound but leak from from every joint. The brackets are as good as the day the were put up, so question is - is it possible to get gutters formed/ordered to...
  7. R

    overalls

    i know you said unbranded but the claas overalls are great and less than the dickies zipper ones
  8. R

    Guess the offence

    The tractor looks to be in 4 wheel steer mode?
  9. R

    IH 674 Seat

    Tractorparts.co.uk
  10. R

    Gear oil pumps

    What make is the old one you have? The ones I have do leak a bit and make the top of the cans oily and dirty.
  11. R

    Gear oil pumps

    Hi need a gear oil pump to go on a 25l barrel with a metal 90deg nozzle for filling hubs and axles etc. Can anybody recommend one cheers
  12. R

    Magnum310 rear crankshaft seal

    I dont know how would I check? There's a breather box on top of the rocker cover which the breather pipe comes from which i change every 1000hrs. Just wondering if its a weak spot on them.
  13. R

    Magnum310 rear crankshaft seal

    It had a new breather at 3000 hrs
  14. R

    Magnum310 rear crankshaft seal

    Anybody discovered why these engines seem to leak from the rear crank seal? Do you need to lift the engine out to replace it? Ours has been done twice by a dealer in 3000 hrs and now needs doing again at 4000 hrs cheers
Top