I had the exact same problem with my MF38 with 20ft power flow header, as soon as the oil got to 60 degrees no lift. I tryed changing filters and oil etc but no better. my local specialist said there was a chance there was an internal leak in the valve block meaning a crack internally letting...
I have a pair of Michelin MachXbib 710/70/R42 tyre, about 20mm tread remaining so around 30% left. One has a couple of cuts in the sidewall but were fine when taken on without leaks etc. if any interest give me a call 07743489400
Thanks
I drilled mine with a claydon at 4-5 inches and left unrolled from the 17th October and was glad they went in that depth as it rained and couldn’t get pre em on which included roundup until 4th November and I was only just in time as they were very close to emerging.
I drilled some spring barley with my SR yesterday and rolled in today, as far as set up I put the front tine in between 4-5 inches and just buried the seed into filth and levelled over using the rear paddles.
It went into a oat / vetch cover, it didn’t look the tidiest as I was drilling it but...
I run a 3.45 SR and had it on a 150hp deutz with was both under powered and under weight but just did the job aslong as your not wanting to put the legs in deep and on heavy ground. After taking on more contract drilling and needing to do a better job in more situations I now have a 7930 which...
I tried cutting and spraying glue with our 6800 lining and it didn't do it, just made a sticky mess as the liner allows the glue come through. I ended up putting 4 teck bolts with large washers on in each corner to hold it back up
Large square baler: CLAAS - CLAAS 1200 QUADRANT BALER
Category: Large square baler Manufacturer: CLAAS Price: £6000 Condition: Used
Description:
1990 Claas 1200 Baler - 1.2m X 0.7m 6 String
I've owned the baler for 5 season and it has been faultless baling around 1500/year ONLY straw and...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.