Both to rp12 with string tie. One is cosmetically better but done more work. The other is mechanical really good but has been bashed about a bit. I'm based in Norfolk
Evening all.
We have 2 welger balers to sell like the one pictured below. Both work ok. Just wondering what rough value they have. I can't find any for sale to compare.
Many thanks
It needs to be sprayed at 100psi so i imagine it would be a lot of work for a 50ltr one. He said to search on YouTube for grafo therm and watch the videos by total container solutions, it looks really simple.
I had a chat with a really helpful chap from grafo therm in saxmundham. He can supply the foam and a spray gun to do my roofing sheets. He recommended doing the sheets before putting them on the building but it can be done on a finished building. I'm going to wait until the weather is warmer to...
Hi everyone
I bought a load of box profile roofing sheets cheap that don't have any insulation on. Has anyone used grafo therm anti condensation spray? I'm tight so want to do it myself but is it cost effective or am I better to pay professionals to do it? I can buy a spray gun for about £50...
Yes the roller splines are gone and the internals for the hub has had it. We shortened the chain and removed the sprocket. Run well nice and smooth but we will see what it's like on silage next year. Thanks for the info on the other type of shaft I'll have a look into that if it needs replacing...
Thanks so frustrating isn't it.
To be honest we have tried pretty much everything that you have surgested. I spoke to a friend who had the exact same problem and they had asked a vet and they said it is very common now. We are making some progress with one calf, once you get the teet in if you...
Hi all
Got two calf's under a week old that we had to pull out so they both have swollen tongues. Having a nightmare trying to get them to suck off the cow. If we milk the cow and give it in a bottle they drink fine but just won't suck off the cow even when you put the teet in its mouth. Anyone...
Thanks for the reply
Your right about the parts manuals, took some finding but really good. Also right about the silage kit there is an option of a roller without a sprocket. We don't do much silage and it's not normally heavy wet stuff so I'm thinking about removing the sprocket and shortening...
Hi all
Welger RP435
Anyone know why the sprocket arrowed in picture has a ratchet type assembly inside? I prosume it lets the roller free wheel but why? I'd like to put a normal sprocket on there because a new is far from cheap.
Thanks in advance
Evening everyone
Looking at a single pass stubble cultivator but my biggest tractor is 140hp. According to the sumo website the hp required for the 2.5m is 120-130hp. Anyone have or use one and what hp are you using? Most of our land is light. Thanks
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.