Sausage's latest activity
-
SSausage replied to the thread Best place to buy suspension accumulators.The tricky bit about this knowing the charge pressure. If you know this, any hydraulics supplier.
-
SSausage replied to the thread Changed tractor hub seals and they are still leaking.Did you put the seal in the right way round? Made the mistake myself once
-
SSausage replied to the thread Is there an easy way to drop the fuel tank off an MF4225?.I’m not sure you’ll get a simpler way. Many a time I’ve tried a shortcut, to waste time and have to do it the way I knew it should have...
-
SSausage replied to the thread Keeping manure spreader clean.Park it in a shed whilst dirty if washing out is a problem, or you want to get straight to ploughing. Whilst wet muck isn’t brilliant...
-
SSausage replied to the thread 100ish HP Tractor.MF 5455. Plenty about, familiar for your friend and dependable, whilst meeting all criteria above.
-
SSausage replied to the thread MF148 hydraulics....I can guarantee you that 300 series arms drop. I wouldn’t try putting seals from this series in expecting a drastic improvement as I...
-
SSausage replied to the thread MF148 hydraulics....I know, our fert outfit was a 565 with manual on/off until not that long ago.
-
SSausage replied to the thread MF148 hydraulics....If it doesn’t have an aux pump the only way is to use a diverter valve, which bolts on the top of the transmission just in front of the...
-
SSausage replied to the thread Massey Ferguson 390 Engine Rattling Noise - Balancer Unit?.We had a real rough noise coming from our 390T a few years back, more like banging than that rattling. Somehow, despite being serviced...
-
SSausage replied to the thread Can I hardface mild steel?.At 10 acres a year is hardox really needed? The roller could well wear out before the teeth.
-
SSausage replied to the thread 4wd All terrain tyres.Personally I think the width is more of a consideration for off road. My Land Rover on 235 AT2s won’t quite go the places dads does on...
-
SSausage replied to the thread Why Are Young People Not Learning Trades/Skills?.It’s not just in the trades. I work in an office as a systems engineer. You get some good young people coming in, but you also get...
-
SSausage replied to the thread I admit, I have a workshop tool addiction :-).Got some recently too. Good tool
-
SSausage replied to the thread Changing transmission oil on MF5455.Also known as the most fiddly filter to change on the entire tractor. We also have one right down in the bottom of the tans, near the...
-
SSausage replied to the thread Oil/diesel mix sprayer..Why not use one of those bottles you pressurise by hand and it sprays it out, seem good for this sort of thing.