Sharny dubs's latest activity
-
SSharny dubs replied to the thread Bearings.Definitely not. never ever.
-
SSharny dubs replied to the thread Bearings.That were prices from my online parts account. Haven't tried my local bearing supplier yet but I will.
-
SSharny dubs replied to the thread Bearings.I wont know until I start stripping discs and see the condition they are in. So anything upto 32 bearings as it's a 4m drill.
-
SBuying new bearings for the discs on my drill. 6305 2rs Go part £2.01 FAG £5.97 SKF £10.57 Worth paying the extra for skf or are they...
-
SSharny dubs reacted to clbarclay's post in the thread Massey Ferguson 6400 v 7600 v 7700 series with
Like.
A PhD student at harper was researching torque distribution between tractor front and rear axles. They were doing tests in the field... -
SSharny dubs reacted to Spud's post in the thread Massey Ferguson 6400 v 7600 v 7700 series with Like.
Nowt wrong with my reading skills chap. Braking at 50k is for the vast majority of the time avoidable if the driver pays attention to...
-
SSharny dubs reacted to Spud's post in the thread Massey Ferguson 6400 v 7600 v 7700 series with Like.
There's the problem. Why in the world would you do that? Can you not read the road ahead?
-
SSharny dubs reacted to James's post in the thread Massey Ferguson 6400 v 7600 v 7700 series with Like.
🥱🥱🥱🥱 Another sweeping generalisation. Not everyone has had the issues you've had with masseys.
-
SThanks.
-
SSharny dubs replied to the thread Sale near Aberdeen.Yes it made 6000
-
SThought it was you. He did try me with the agrifac but it’s a pound or 2 too much just now. You’ll of heard the lanctrac before you seen...
-
S12 year old is old?? 😱😱
-
SExactly my thoughts. We did this a year ago and it has been a godsend this year. One on sprayer, the other on drill. Just jump from one...
-
SGet another like you have. It will reduce the time spent swapping equipment and halve the number of hours the original tractor does. If...
-
SSharny dubs replied to the thread 8737 transmission is overheating.I know of one locally that was doing something similar. Boiling the oil on a drill. Turned out to be a valve on the back end. Took them...