SMID's latest activity
-
SMID reacted to Rob Holmes's post in the thread best autosteer for t3 6480 while the grant is on with
Like.
I’ve done it with my t3 6480, went with Trimble, not cheapest but very good quality and service to back it up -
Surely it is a piece
-
SMID replied to the thread Massey 390 2wd Loader.2 WD 290 and 390 are both the same casings .
-
SMID reacted to REStracTORATION's post in the thread 1970 MF 135 UK original paint colours with Like.
Do it before you paint unless your not to bothered about chipping all the paint when it's painted But the oil can leak into your brakes...
-
Your thoughts were relevant in the days when grandfather Charlie Marshall most senior ran the company It's the grandson's now. The...
-
SMID reacted to REStracTORATION's post in the thread 1970 MF 135 UK original paint colours with Like.
Black top grill Black and silver lower grill Mf Red tin work and seat (there is so many makers of mf red that its tricky to suggest...
-
SMID replied to the thread 1970 MF 135 UK original paint colours.Stoneleigh grey for the skid unit all except the lift quadrant which was passive coated the same as the check chains , the dynamo and...
-
People can get their head around gears easier. I like gears, it's what I'm used to and as mentioned before VT by all accounts is a bit...
-
It is what it is, just don't buy the tractor you've heard bad reports about, but you'll struggle. People on this thread have 8S' with...
-
I dont know much about the 8s apart from what I have read on here and other sources, but as a retired MF dealership engineer, I...
-
-
They are a glorified 188 with a 6cyl, powershuttle and splitter. The 24x24 had too much packed into the 188 casting and was very prone...
-
Ah snap on, when I started aged 16 the place did trucks, cars, Massey Ag and industrial. Every week the snap on man in a van came round...
-
You could soon pull a Massey apart. Just needed 7/16" to 3/4" AF spanners, pair of pliers, screwdriver and a hammer for good measure.