TC85336's latest activity
-
TTC85336 replied to the thread Massey Ferguson 500 series hydraulics.Worth doing here the low pressure system description. Two common ports on auxiliary pump. One to the front and one to the IPTO. The...
-
-
TThe relatively small bolts, a legacy from when tractors and implements were far smaller, are/were notorious for coming loose. That is...
-
TTC85336 replied to the thread Massey Ferguson 500 series hydraulics.That's what I thought as well. So the cab floor came up; eventually. All those sheared bolts and captive nuts I destroyed - joy...
-
TSurely you can follow the pipes back from the oil cooler to their source?
-
TTC85336 replied to the thread Massey Ferguson 500 series hydraulics.Before I finish on splitting let me describe something for the novice, which I am sure many of the more experienced hands, on here, do...
-
-
TTC85336 replied to the thread Massey Ferguson 500 series hydraulics.Well taking the top cover off and things, whilst not clear, became apparent. Oil gets to the oil cooler and then onto the multipower...
-
-
TTC85336 replied to the thread Massey Ferguson 500 series hydraulics.The Parts list provides, not very clearly, the evidence as to how that oil is getting to the front of the tractor. Attached is P172 of...
-
-
TTC85336 replied to the thread Massey Ferguson 500 series hydraulics.Before I finish on problems re "splitting" there is a further issue, which undoubtedly caught out the unwary on many an occasion and...
-
-
TTC85336 replied to the thread Massey Ferguson 500 series hydraulics.The Foster digger is brilliant and it was a great purchase, thank you, particularly for loading it on the trailer. It has just a pity...
-
-
THello am I right in thinking this is Tony? I recognise your in-depth writing style and the tractor makes sense too. You purchased a...
-
TTC85336 replied to the thread Massey Ferguson 500 series hydraulics.Another thing needed for rejoining after splitting, I used the MF recommended guide studs. You will see I increased F to 4 1/2" and D...
-
-
TTC85336 replied to the thread Massey Ferguson 500 series hydraulics.As I wrote upthread but relevant here, a good bottle jack under the sump with the front wheels chocked and a large trolley jack lifting...
-
TTC85336 replied to the thread Massey Ferguson 500 series hydraulics.Holding it in place while operating the jack is a bit of a handful alone but I did it (3 times eventually)OK. you just need to spring...
-
-
TTC85336 replied to the thread Massey Ferguson 500 series hydraulics.Now, during dissembley, I did what others do on you tube and used a mallet and drift on the cross-member at the back of the cab. Having...
-
-
TTC85336 replied to the thread Massey Ferguson 500 series hydraulics.About to go back together then back together.
-
