Teddy99's latest activity
-
TTeddy99 replied to the thread Ferguson TEF20: Heavy Oil Consumption after overhaul.What brand of running in oil would you recommend ? How many hours would you leave in the running in oil for?
-
TTry a testlight instead of a multimeter if you have one. If it is the earth, get a length of wire, or even jumpcables, and connect the...
-
TTeddy99 replied to the thread Cav fuel pump overhaul ?.I meant get the injectors refurbished when you're getting the injector pump refurbished, not get the injectors replaced.
-
TTeddy99 replied to the thread Cav fuel pump overhaul ?.Get the injectors too .
-
TTeddy99 replied to the thread McCulloch 335 chainsaw….. any good?.I have a McCulloch 338 with over 15 years. Brilliant saw cuts everything I want , starts easy , light to use and lots of spares...
-
TTeddy99 replied to the thread 2000G tanker.Horsepower needed??.I thought there was only a grant for trailing shoe, no grant for dribble bar ,or has it changed?
-
TTeddy99 replied to the thread Hydraulic oil temp Merlo.Is there a oil cooler radiator on it to cool the hydraulic oil ? If there is maybe the fins are blocked and need a blow out .
-
TCan you identify the wire on the Regulator which goes to the warning light? If so disconnect on the regulator, get another warning lamp...
-
Tnothing wrong with a 642 but as said terminals are in the centre line, leads might reach but it can interfer with your battery...
-
TTeddy99 replied to the thread 643 battery price??.Would the 665 be as good as a 642 ?
-
TEbay it and buy Milwaukee. Snap on power tools are over priced junk.
-
Thttps://www.ebay.co.uk/itm/204083459161?hash=item2f84527459:g:ftQAAOSwBZJjEryQ&amdata=enc%3AAQAHAAAA4DXK%2FdoPsEQ54pDqFn2%2FTa9USCgXEhqNV...
-
TTeddy99 replied to the thread JCB ram removal..Would you have a link to where you bought it ? Any pictures of it ?
-
TSOLVED I was resigning myself to using the temporary charge circuit shown above, so instead of just jamming the wire into the Ign side...
-
TTeddy99 replied to the thread Case 1494 electrical issue.There are 2 block connectors inside the cab , in front of the clutch pedal and the brake pedal. Pull both connectors apart and spray...
