Recent content by tinkerman

pull 12 m set of he-va rollers with a 195 hp deere after drilling which includes hillsides. do a good job

kuhn is a little easier to clean but care and time is needed with both to get rid of all fert residues.

used to have a krm spreader when on 28 metres and it worked very well although because both the discs spread with a double overlap the discs spin quite fast and as a result you could always tell if a spreader was a krm from a distance as there is always a cloud of dust behind it. got a kuhn when...

to answer your questions, we have drying and good haulage, north yorkshire, 70% chopping and would get the dealer to check it over after the first few years. thanks for all the replies. we dont think there is a lot of saving having your own combine over a contractor but obviously timeliness is...

presumably there is nothing much between all the major manufacturers

new to nearly new. hope to run it for quite a few years

thinking of getting our own combine after years of contractors. which make and model would everyone choose for the job. we have all major dealers reasonably close by. cutting 800 acres wheat,barley and osr and need to make a good job of chopping and spreading the straw. we will also bale a...

interesting as the NAAC 2021 quotes £ 9.20/acre. thought that this was far too high.

what sort of cost per acre is the rate for chopping straw with a combine

Used a 6195 on a 6 furrow greg besson plough this autumn , no problems lifting the plough.