I lifted the floor, which I had forgotten all about since last time 😭. So thanks for that.
Thanks for the tip about the resonator. Was wondering what that was! I'll know for next time!
It was a pressure switch that gave up and was spraying oil. Found it seeping out of the wiring.
Handy fix...
Hello
As title says, tm 140 has a considerable oil leak under the cab. Has painted the underside of cab and transmission and fuel tank. Problem is I cant find it. Have Tried steering and brakes and that while in yard but can't replicate it. Would it be something from transmission in a higher...
Hello.
I have an old type berthoud racer. It's from late 90s. I did some work on pump and seals etc and have it together again but it keeps blowing the pressure pipe off the pump. I suspect I have the pipe work reassembled incorrectly. Would anyone in the forum have a picture or even video of...
Hello. Just driving down the road here and the merlo has started this clicking noise as I drive forward. Only in second gear and only going forward. Looks all OK visually. Clicking sounds like it's from front right hand side. Hardy spicer maybe?
Thanks
Tom
I think comp ram pin and bushes for sure. I can see some movement on main arm pin too. Ram looks OK... it's a new to me machine. I'm not sure greasing was a top priority.
Is it a big job to change them out? Looks fairly straight forward!
I fiddled with switch without removing it so that i have dipped beams and put it all back again. I changed all worklights for leds to reduce load. I don't need anymore headaches!
The arm is now lifting up a bit or banging down when I crowd bucket back the whole way!
Got power back to the headlights with fiddling. I don't know whatbi did but there is only power to the dimmed connector but not the full headlight connector. If I put in the h7 bulb there is a click somewhere on side of machine and it's gone for about 5 mins then power reappears. I might remove...
New to me merlo here. There is intermittent power to the main headlights. Side lights are OK. With the h7 bulbs out, the dash lights will work and do full beam on the dash. As soon as I plug in a bulb it stops working and the dash lights go out altogether amd may or may not come back. I am...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.